CC1200

更新时间： 2024-11-21 12:52:59

品牌	Logo	应用领域
德州仪器 - TI		/
页数	文件大小	规格书
30页	1297K
描述
Low Power, High Performance RF Transceiver

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

CC1200 数据手册

CC1200

Low Power, High Performance RF Transceiver

Applications

Low current consumption:

Low power, high performance, wireless systems with

up to 1250 kbit/s data rate

169 / 433 / 868 / 915 / 920 MHz ISM/SRD bands

Possible support for additional frequency bands:

137 – 158.3, 205 – 237.5, and 274 – 316.6 MHz

Smart Metering (AMR/AMI)

Home and building automation

Wireless alarm and security systems

Industrial monitoring and control

Enhanced Wake-On-Radio functionality for automatic

low-power receive polling

Power down: 0.3 μA (0.5 μA with sleep timer active)

RX: 2 mA in RX Sniff Mode

RX: 19 mA peak current in low power mode

RX: 23 mA peak current in high performance mode

TX: 46 mA at +14 dBm

Wireless healthcare applications

Wireless sensor networks and Active RFID

IEEE 802.15.4g applications

Digital features

WaveMatch: Advanced digital signal processing for

improved sync detect performance

Wireless M-Bus, all modes

Security: Hardware AES128 accelerator

Data FIFOs: Separate 128-byte RX and TX

Includes functions for antenna diversity support

Support for re-transmissions

Regulations

Suitable for systems targeting compliance with:

Europe

ETSI EN 300 220, EN 54-25

Support for auto-acknowledge of received packets

FCC CFR47 Part 15

FCC CFR47 Part 90

Automatic Clear Channel Assessment (CCA) for listen-

before-talk (LBT) systems

Japan

ARIB STD-T30, T67, T108

Built in coding gain support for increased range and

robustness

Digital RSSI measurement

Key Features

Support for seamless integration with the CC1190 for

increased range giving up to 3 dB improvement in RX

sensitivity and up to +27 dBm TX output power

RF performance and analog features

High performance single chip transceiver

Improved OOK shaping for less occupied bandwidth,

enabling higher output power whilst meeting regulatory

requirements

Excellent receiver sensitivity:

-123 dBm at 1.2 kbps

-110 dBm at 50 kbps

Blocking performance: 86 dB at 10 MHz

Dedicated packet handling for 802.15.4g

Adjacent channel selectivity: up to 60 dB at

12.5 kHz offset

CRC 16/32

FEC, dual sync detection (FEC and non-FEC

packets)

Very low phase noise: -114 dBc/Hz at 10 kHz

offset (169 MHz)

Whitening

Programmable output power up to +16 dBm with

0.4 dB step size

Automatic output power ramping

General

Supported modulation formats: 2-FSK, 2-GFSK,

4-FSK, 4-GFSK, MSK, OOK

RoHS compliant 5x5mm QFN 32 package

Pin compatible with the CC1120

Supports up to 1.25 Mbps data rate in transmit and

receive

Description

The CC1200 is

fully integrated single-chip radio

CC1200 is optimized towards wideband applications but can

transceiver designed for high performance at very low

power and low voltage operation in cost effective wireless

systems. All filters are integrated, removing the need for

costly external SAW and IF filters. The device is mainly

intended for the ISM (Industrial, Scientific and Medical)

and SRD (Short Range Device) frequency bands at 164-

190 MHz, 410-475 MHz and 820-950 MHz.

also cover narrowband down to 12.5 kHz channels well.

VDD_GUARD

RESET_N

GPIO3

GPIO2

DVDD

LPF1

LPF0

The CC1200 provides extensive hardware support for

packet handling, data buffering, burst transmissions, clear

channel assessment, link quality indication and Wake-On-

Radio. The CC1200 main operating parameters can be

controlled via an SPI interface. In a typical system, the

CC1200 will be used together with a microcontroller and

only few external passive components.

AVDD_SYNTH1

21 DCPL_VCO

20 LNA_N

CC1200

DCPL

19 LNA_P

TRX_SW

GND

GROUND PAD

SCLK

17 PA

The CC1200 and the CC1120 are both part of the high

performance transceiver family. The CC1120 is more

optimized towards narrowband applications, while the

PRODUCTION DATA information is current as of publication date. Products conform to

specifications per the terms of Texas Instruments standard warranty. Production processing does

not necessarily include testing of all parameters.

SWRS123B – REVISED JUNE 2013

Page 1 of 23

12 3 4 5 6 7...30

中文翻译

下载PDF

CC1200 替代型号

型号	品牌	替代类型	描述	数据表
CC1125	TI	功能相似	Ultra-High Performance RF Narrowband Transceiver
CC1120	TI	功能相似	CC1120 是一个完全集成的单芯片无线电收发器，为经济高效的无线系统在低功耗和低电压操作
CC1020	TI	功能相似	Single Chip Low Power RF Transceiver for Narrowband Systems

与CC1200相关器件

型号	品牌	获取价格	描述	数据表
CC1-200-GA	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-GAQ	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-GAW	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-GBQ	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-GTW	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-JAW	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 5% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-JBW	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 5% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-JT	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 5% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-JTW	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 5% +/-Tol, 1500ppm/Cel, Through Hole
CC1-200-KAW	RCD	获取价格	Fixed Resistor, Carbon Composition, 1W, 20ohm, 500V, 10% +/-Tol, 1500ppm/Cel, Through Hole

与CC1200相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

31
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

22
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

51
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

50

产品中心

服务支持

精选活动

关于我们

帮助中心

CC1200

CC1200 数据手册

CC1200 替代型号

与CC1200相关器件

与CC1200相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

CC1200

CC1200 数据手册

CC1200 替代型号

与CC1200相关器件

与CC1200相关文章

您还可以找

您在本页遇到什么问题？