CAT853, CAT859, CAT863,
CAT869
3-Pin Microprocessor
Power Supply Supervisors
Description
The CAT853, CAT863, CAT859, and CAT869 are supervisory
circuits that monitor power supplies in digital systems.
These devices generate a reset signal, which is asserted while the
power supply voltage is below a preset threshold level and for at least
140 ms after the power supply level has risen above that level.
Industry standard threshold levels are offered to support +3.3 V or
5.0 V systems.
http://onsemi.com
SOT−23
TB SUFFIX
CASE 527AG
The CAT859 and CAT869 feature a RESET push−pull output
(active low) for the two pinout options.
The CAT853 and CAT863 feature an open drain RESET output
(active low). Both require a pull−up resistor on the RESET output.
Fast transients on the power supply are ignored and the output is
PIN CONFIGURATION
CAT853, CAT859
guaranteed to be in the correct state at V levels as low as 1.0 V.
1
CC
RESET
Features
3
• Precision Monitoring of +3.3 V (−5%, −10%),
5 V (−10% Power Supplies)
• Active Low Reset Output
V
CC
2
GND
• Reset Valid down to V = 1.0 V
CC
• 6 mA Power Supply Current
CAT863, CAT869
1
• Power Supply Transient Immunity
• Industrial Temperature Range: −40°C to +85°C
• SOT−23 Package
RESET
3
GND
2
• These Devices are Pb−Free and are RoHS Compliant
Applications
V
CC
• Computers, Servers, Laptops and Cable Modems
• Wireless Communications
• Embedded Control Systems
• White Goods
(Top Views)
MARKING DIAGRAM
• Power Meters
XXXMG
• Intelligent Instruments
• PDAs and Handheld Equipment
G
Table 1. THRESHOLD SUFFIX SELECTOR
XXX
M
= Specific Device Code
= Date Code
Nominal Threshold Voltage
Threshold Suffix Designation
G
= Pb−Free Package
4.63 V
4.38 V
4.20 V
4.00 V
3.08 V
2.93 V
2.63 V
2.40 V
2.32 V
L
M
F
J
(*Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
T
S
R
C
Z
© Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
May, 2012 − Rev. 10
CAT853/D