®
Bu s s m a n n
Fa s t -Ac t in g Ax ia l Le a d e d
5 m m x 1 5 m m Gla s s Fu s e s
C5 1 8
Dimensional Data
±
15.0 0.5mm
5.2 ± 0.3mm
5.0mm (Typ.)
0.6mm Dia. (Typ)
Markings: Manufacturer’s Symbol,
Product Symbol, Voltage, Ampere,
Testing Agency Mark (Optional)
Dimensions are in
Millimeters (mm)
Time-Current Characteristic Curves–Average Melt
(Full Size Curves Available)
C518 Axial Leaded Fast-Acting Fuses.
Limits for Pre-arcing Time/UL Listed Fuses.
AMPERE
RATING
100
135%
MAX
1 hr.
110%
MIN
200%
MAX
Amp Ratings
100mA - 7A
4 hr.
2 sec.
Agency File Numbers: UL Listing. File E75865,
10
Guide # JDYX.
CSA Certification. File LR65063
Class 1422-01.
Product Symbol:
C518
Physical Fuse Size:
5 x 15mm
1
Mechanical Characteristics:
Materials:
Endcaps are silver-plated brass; leads are
tin-plated copper and tube is glass.
Optional sleeve is flexible fluoropolymer (UL
Flammability rating VW-1). The tube will self
extinguish within one minute. 25% maximum
flag burn per ASTM Flammability Test ASTM
D2671 Procedure C.
.1
Lead Pull:
Leads will withstand a seven pound pull
applied axially to the lead for five seconds.
.01
Lead Bend:
Leads will be bent 90 degrees in one direction,
back to original direction, then 90 degrees in
the opposite direction and return to the cycle.
Leads will withstand two cycles. The bending
is to be done with a two pound weight
CURRENT IN AMPERES
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
attached to the end of the lead.
Temp. Range: -55°C to +85°C with proper derating.
Weight:
1000 = 1.33kg.
Form No. C518
Page 1 of 2
BIF Doc #2026
12-17-98
SB98107
Rev. A