Datasheet > C410C473K5R5TA

C410C473K5R5TA

更新时间： 2024-11-24 19:35:15

品牌	Logo	应用领域
基美 - KEMET		电容器
页数	文件大小	规格书
14页	1058K
描述
Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.047uF, Through Hole Mount, AXIAL LEADED

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

C410C473K5R5TA 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	包装说明：	,
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8532.24.00.40	Factory Lead Time：	8 weeks
风险等级：	1.53	电容：	0.047 µF
电容器类型：	CERAMIC CAPACITOR	直径：	2.54 mm
介电材料：	CERAMIC	JESD-609代码：	e3
长度：	4.32 mm	安装特点：	THROUGH HOLE MOUNT
多层：	Yes	负容差：	10%
端子数量：	2	最高工作温度：	125 °C
最低工作温度：	-55 °C	封装形状：	TUBULAR PACKAGE
封装形式：	Axial	包装方法：	BULK
正容差：	10%	额定（直流）电压（URdc）：	50 V
表面贴装：	NO	温度特性代码：	X7R
温度系数：	15% ppm/ °C	端子面层：	Matte Tin (Sn) - with Nickel (Ni) barrier
端子形状：	WIRE	Base Number Matches：	1

C410C473K5R5TA 数据手册

MULTILAYER CERAMIC CAPACITORS/AXIAL

& RADIAL LEADED

Multilayer ceramic capacitors are available in a

edges of the laminated structure. The entire structure is

fired at high temperature to produce a monolithic

block which provides high capacitance values in a

small physical volume. After firing, conductive

terminations are applied to opposite ends of the chip to

make contact with the exposed electrodes.

Termination materials and methods vary depending on

the intended use.

variety of physical sizes and configurations, including

leaded devices and surface mounted chips. Leaded

styles include molded and conformally coated parts

with axial and radial leads. However, the basic

capacitor element is similar for all styles. It is called a

chip and consists of formulated dielectric materials

which have been cast into thin layers, interspersed

with metal electrodes alternately exposed on opposite

TEMPERATURE CHARACTERISTICS

Ceramic dielectric materials can be formulated with

a wide range of characteristics. The EIA standard for

ceramic dielectric capacitors (RS-198) divides ceramic

dielectrics into the following classes:

Class III: General purpose capacitors, suitable

for by-pass coupling or other applications in which

dielectric losses, high insulation resistance and

stability of capacitance characteristics are of little or

no importance. Class III capacitors are similar to Class

II capacitors except for temperature characteristics,

Class I: Temperature compensating capacitors,

suitable for resonant circuit application or other appli-

cations where high Q and stability of capacitance char-

acteristics are required. Class I capacitors have

predictable temperature coefficients and are not

affected by voltage, frequency or time. They are made

from materials which are not ferro-electric, yielding

superior stability but low volumetric efficiency. Class I

capacitors are the most stable type available, but have

the lowest volumetric efficiency.

which are greater than

15%. Class III capacitors

have the highest volumetric efficiency and poorest

stability of any type.

KEMET leaded ceramic capacitors are offered in

the three most popular temperature characteristics:

C0G: Class I, with a temperature coefficient of 0

30 ppm per degree C over an operating

temperature range of - 55°C to + 125°C (Also

known as “NP0”).

Class II: Stable capacitors, suitable for bypass

or coupling applications or frequency discriminating

circuits where Q and stability of capacitance char-

acteristics are not of major importance. Class II

capacitors have temperature characteristics of 15%

or less. They are made from materials which are

ferro-electric, yielding higher volumetric efficiency but

less stability. Class II capacitors are affected by

temperature, voltage, frequency and time.

X7R: Class II, with a maximum capacitance

change of 15% over an operating temperature

range of - 55°C to + 125°C.

Z5U: Class III, with a maximum capacitance

change of + 22% - 56% over an operating tem-

perature range of + 10°C to + 85°C.

Specified electrical limits for these three temperature

characteristics are shown in Table 1.

SPECIFIED ELECTRICAL LIMITS

Temperature Characteristics

X7R

Parameter

C0G

Z5U

Dissipation Factor: Measured at following conditions.

C0G – 1 kHz and 1 vrms if capacitance >1000pF

1 MHz and 1 vrms if capacitance 1000 pF

X7R – 1 kHz and 1 vrms* or if extended cap range 0.5 vrms

Z5U – 1 kHz and 0.5 vrms

2.5%

(3.5% @ 25V)

0.10%

4.0%

Dielectric Stength: 2.5 times rated DC voltage.

Pass Subsequent IR Test

1,000 M

or 100 G

1,000 M

or 100 G

1,000 M

or 10 G

Insulation Resistance (IR): At rated DC voltage,

whichever of the two is smaller

Temperature Characteristics: Range, °C

Capacitance Change without

DC voltage

-55 to +125

30 ppm/°C

-55 to +125

15%

+ 10 to +85

+22%,-56%

* MHz and 1 vrms if capacitance 100 pF on military product.

Table I

12 3 4 5 6 7...14

中文翻译

下载PDF

C410C473K5R5TA 替代型号

型号	品牌	替代类型	描述	数据表
C410C473K5R5TA7200	KEMET	类似代替	Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.047uF, Thr
SA105C473KAR	KYOCERA AVX	类似代替	Axial Leads/SpinGuard

与C410C473K5R5TA相关器件

型号	品牌	获取价格	描述	数据表
C410C473K5R5TA7200	KEMET	获取价格	Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.047uF, Thr
C410C473KAR5TA	KEMET	获取价格	Ceramic Capacitor, Multilayer, Ceramic, 250V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.047uF, Th
C410C473KAR5TA7200	KEMET	获取价格	Ceramic Capacitor, Ceramic, 250V, 10% +Tol, 10% -Tol, X7R, -/+15ppm/Cel TC, 0.047uF,
C410C473M5R5CA7200	KEMET	获取价格	CAPACITOR, CERAMIC, MULTILAYER, 50V, X7R, 0.047uF, THROUGH HOLE MOUNT, AXIAL LEADED
C410C473M5U5CA	KEMET	获取价格	Ceramic Capacitor, Multilayer, Ceramic, 50V, 20% +Tol, 20% -Tol, Z5U, -56/+22% TC, 0.047uF
C410C473M5U5CA7200	KEMET	获取价格	CAPACITOR, CERAMIC, MULTILAYER, 50V, Z5U, 0.047uF, THROUGH HOLE MOUNT, AXIAL LEADED
C410C473M5U5TA	KEMET	获取价格	Ceramic Capacitor, Multilayer, Ceramic, 50V, 20% +Tol, 20% -Tol, Z5U, -56/+22% TC, 0.047uF
C410C473M5U5TA7200	KEMET	获取价格	Ceramic Capacitor, Multilayer, Ceramic, 50V, 20% +Tol, 20% -Tol, Z5U, -56/+22% TC, 0.047uF
C410C473MAR5HA	KEMET	获取价格	Ceramic Capacitor, Multilayer, Ceramic, 250V, 20% +Tol, 20% -Tol, X7R, 15% TC, 0.047uF, Th
C410C473MAR5TA	KEMET	获取价格	Ceramic Capacitor, Ceramic, 250V, 20% +Tol, 20% -Tol, X7R, -/+15ppm/Cel TC, 0.047uF,

与C410C473K5R5TA相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

39
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

31
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

59
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

55

产品中心

服务支持

精选活动

关于我们

帮助中心

C410C473K5R5TA

C410C473K5R5TA 技术参数

C410C473K5R5TA 数据手册

C410C473K5R5TA 替代型号

与C410C473K5R5TA相关器件

与C410C473K5R5TA相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

C410C473K5R5TA

C410C473K5R5TA 技术参数

C410C473K5R5TA 数据手册

C410C473K5R5TA 替代型号

与C410C473K5R5TA相关器件

与C410C473K5R5TA相关文章

您还可以找

您在本页遇到什么问题？