Nexperia
BZX884D-B10
Voltage regulator diode
11 Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product
development.
Preliminary [short] data sheet
Product [short] data sheet
Qualification
Production
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
11.2 Definitions
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
Draft — The document is a draft version only. The content is still under
such equipment or applications and therefore such inclusion and/or use is at
internal review and subject to formal approval, which may result in
the customer’s own risk.
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
Short data sheet — A short data sheet is an extract from a full data sheet
without further testing or modification. Customers are responsible for the
with the same product type number(s) and title. A short data sheet is
design and operation of their applications and products using Nexperia
intended for quick reference only and should not be relied upon to contain
products, and Nexperia accepts no liability for any assistance with
detailed and full information. For detailed and full information see the
applications or customer product design. It is customer’s sole responsibility
relevant full data sheet, which is available on request via the local Nexperia
to determine whether the Nexperia product is suitable and fit for the
sales office. In case of any inconsistency or conflict with the short data sheet,
customer’s applications and products planned, as well as for the planned
the full data sheet shall prevail.
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products. Nexperia does not accept
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
any liability related to any default, damage, costs or problem which is based
Nexperia and its customer, unless Nexperia and customer have explicitly
on any weakness or default in the customer’s applications or products, or
agreed otherwise in writing. In no event however, shall an agreement be
the application or use by customer’s third party customer(s). Customer is
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
responsible for doing all necessary testing for the customer’s applications
and products using Nexperia products in order to avoid a default of the
applications and the products or of the application or use by customer’s third
party customer(s). Nexperia does not accept any liability in this respect.
11.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
Limited warranty and liability — Information in this document is believed
damage to the device. Limiting values are stress ratings only and (proper)
to be accurate and reliable. However, Nexperia does not give any
operation of the device at these or any other conditions above those
representations or warranties, expressed or implied, as to the accuracy
given in the Recommended operating conditions section (if present) or the
or completeness of such information and shall have no liability for the
Characteristics sections of this document is not warranted. Constant or
consequences of use of such information. Nexperia takes no responsibility
repeated exposure to limiting values will permanently and irreversibly affect
for the content in this document if provided by an information source outside
the quality and reliability of the device.
of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
or replacement of any products or rework charges) whether or not such
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
damages are based on tort (including negligence), warranty, breach of
in a valid written individual agreement. In case an individual agreement is
contract or any other legal theory. Notwithstanding any damages that
concluded only the terms and conditions of the respective agreement shall
customer might incur for any reason whatsoever, Nexperia's aggregate and
apply. Nexperia hereby expressly objects to applying the customer’s general
cumulative liability towards customer for the products described herein shall
terms and conditions with regard to the purchase of Nexperia products by
customer.
be limited in accordance with the Terms and conditions of commercial sale of
Nexperia.
No offer to sell or license — Nothing in this document may be interpreted
Right to make changes — Nexperia reserves the right to make changes
or construed as an offer to sell products that is open for acceptance or
to information published in this document, including without limitation
the grant, conveyance or implication of any license under any copyrights,
patents or other industrial or intellectual property rights.
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
BZX884D-B10
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Product data sheet
Rev. 1 — 11 October 2017
8 / 10
5秒后页面跳转
压敏电阻器在直流电路中的过压保护应用探讨
电感耐压值及其与电感大小的关系
CNY17F光耦合器：特性、应用、封装、引脚功能及替换型号解析
DS1307资料解析：特性、引脚说明、替代推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
