● Description of electrical characteristics
Described here are the terms of electric characteristics used in this technical note. Items and symbols used are also shown.
Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general document.
1. Absolute maximum ratings
Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute
Maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics.
1.1 Power supply voltage（VDD/VSS）
Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power supply terminal
without deterioration or destruction of characteristics of internal circuit.
1.2
1.3
Differential input voltage （Vid）
Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without deterioration and
destruction of characteristics of IC.
Input common-mode voltage range （Vicm）
Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without deterioration or destruction of
characteristics. Input common-mode voltage range of the maximum ratings not assure normal operation of IC. When normal
operation of IC is desired, the input common-mode voltage of characteristics item must be followed.
1.4
Power dissipation （Pd）
Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal temperature). As for
package product, Pd is determined by the temperature that can be permitted by IC chip in the package（maximum junction temperature）
and thermal resistance of the package
2. Electrical characteristics item
2.1
Input offset voltage （Vio）
Indicates the voltage difference between non-inverting terminal and inverting terminal. It can be translated into the input voltage
difference required for setting the output voltage at 0 [V]
2.2
2.3
Input offset current （Iio）
Indicates the difference of input bias current between non-inverting terminal and inverting terminal.
Input bias current （Ib）
Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at non-inverting terminal
and input bias current at inverting terminal.
2.4
2.5
Input common-mode voltage range （Vicm）
Indicates the input voltage range where IC operates normally.
Large signal voltage gain （AV）
Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal and inverting
terminal.
It is normally the amplifying rate (gain) with reference to DC voltage.
Av = (Output voltage fluctuation) / (Input offset fluctuation)
2.6
2.7
2.8
2.9
Circuit current （ICC）
Indicates the IC current that flows under specified conditions and no-load steady status.
Output sink current （OL）
Indicates the maximum current that can be output under specified output condition (such as output voltage and load condition).
Output saturation voltage, Low level output voltage （VOL）
Indicates the voltage range that can be output under specified load conditions.
Output leakage current, High level output current（I leak）
Indicates the current that flows into IC under specified input and output conditions.
2.10 Response Time （Tre）
The interval between the application of an input and output condition.
2.11 Common-mode rejection ratio （CMRR）
Indicates the ratio of fluctuation of input offset voltage when in-phase input voltage is changed. It is normally the fluctuation of DC.
CMRR ＝（Change of Input common-mode voltage）/（Input offset fluctuation）
2.12 Power supply rejection ratio （PSRR）
Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC.
PSRR＝（Change of power supply voltage）/（Input offset fluctuation）
13/16
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
