BT730 Series
Class 1 Bluetooth v2.0 Module
Every BT730 series Bluetooth® module from Laird Technologies is designed to add
robust, long-range Bluetooth data connectivity to any device. Based on the
market-leading Cambridge Silicon Radio (CSR) BC04 chipset, BT730 modules
provide exceptionally low power consumption with outstanding Class 1 range via
18 dBm of transmit power. A broad range of Bluetooth profiles such as Serial Port
Profile (SPP) and other vital features make BT730 modules superior to other
Bluetooth modules.
With a compact footprint of 15.29 x 28.71 mm, the modules deliver maximum
range with a minimum size. Another integration advantage is the inclusion of a
complete Bluetooth v2.0 protocol stack with support for multi-point connections
and numerous Bluetooth profiles, including Serial Port Profile (SPP), Dial Up
Networking (DUN), FTP Client plus partial support for Headset (HSP), and
HandsFree (HFP). BT730 modules are fully qualified as a Bluetooth End Products,
enabling designers to integrate the modules in devices without the need for
further Bluetooth Qualification.
An integrated AT command processor interfaces to the host system over a serial
port using an extensive range of AT commands. The AT command set abstracts
the Bluetooth protocol from the host application, saving many months of
programming and integration time. It provides extremely short integration times
for data oriented Bluetooth applications.
Included firmware provides programming support for multi-point applications that
use up to three simultaneous data connections to and from the robust BT730
module. A low-cost developer’s kit makes it easy for an OEM to integrate the
module and guarantees the fastest route to prototype and then mass production.
Features & Benefits
Application Areas
.
.
.
.
.
.
.
Bluetooth v2.0
.
.
.
Medical devices
ePOS terminals
Automotive Diagnostic
Equipment
Barcode Scanners
Industrial Cable
Replacement
External or Internal Antennas
Comprehensive AT command set
Bluetooth EPL
Compact Footprint
.
.
Class 1 output - 18dBm
UART interface with GPIO,
PCM & ADC lines
.
.
Industrial Temperature range
Field Proven firmware used on
BTM40x and BISM II product ranges
Full detailed product documentation is available at:
http://www.lairdtech.com/Products/Embedded-Wireless-Solutions/Bluetooth-Radio-
Modules/BT700-Series/BT730/
USA: +1.800.492.2320
Europe: +44.1628.858.940
Asia: +852.2923.0610
wirelessinfo@lairdtech.com
www.lairdtech.com/bluetooth
The details contained within the document are subject to change.