BS801C/02C/04C/06C/08C
Touch Key
Features
·
·
·
·
·
·
·
·
·
·
Operating voltage: 2.2V~5.5V
Ultra low current: 3.0mA at 3V
Auto-calibration
Output type: Level-hold or Toggle
One-key or Any-key State
Key State Mode set by pins or serial command
Open drain NMOS output
High reliability touch detections
High PSRR
Key status monitored using pins or serial bus
General Description
The BS801C/02C/04C/06C/08C are a range of 1 to 8
key touch key devices which can detect human body
contact using external touch pads. The high level of de-
vice integration enable applications to be implemented
with a minimum number of external components.
Special internal circuitry is also employed to ensure
excellent power noise rejection to reduce the possibility
of false detections, increasing the touch switch applica-
tion reliability under adverse environmental conditions.
With auto-calibration, low operating current and a low
power one-key operating state, this range of touch key
devices provides a simple and effective means of imple-
menting touch switches in a wide variety of applications.
The BS804C and BS808C are equipped with a One-line
serial interface to allow easy communication with an exter-
nal MCU for device setup and for touch pin monitoring pur-
poses.
Selection Table
Operating Current at 3V
Key
Output
Type
Touch
Serial
Auto
Part. No.
Package
One-Key
State
Any-key
State
Keys
Interface
Calibration
Level-Hold
or Toggle
BS801C
BS802C
1-Key
2-Key
SOT23-6
3.0mA
¾
¾
¾
Level-Hold
or Toggle
8SOP
8SOP
¾
5.0mA
¾
BS804C
4-Key
3.0mA
8.0mA
Ö
Ö
Level-Hold
or Toggle
16NSOP
BS806C
BS808C
6-Key
8-Key
Level-Hold
16NSOP
16NSOP
3.0mA
3.0mA
14.0mA
18.0mA
¾
Ö
¾
Level-Hold 20SOP/SSOP
¾
Rev. 1.00
1
December 2, 2009