Datasheet > BRF1A

BRF1A

更新时间： 2024-11-20 22:27:51

品牌	Logo	应用领域
杰尔 - AGERE		/
页数	文件大小	规格书
12页	222K
描述
Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

BRF1A 数据手册

Data Sheet

April 2001

Quad Differential Receivers

BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A

The BRF1A device is the generic receiver in this

family and requires the user to supply external

Features

resistors on the circuit board for impedance

matching.

■ Pin equivalent to the general-trade 26LS32 device,

with improved speed, reduced power consumption,

and significantly lower levels of EMI

The BRF2A is identical to the BRF1A, but has an

electrostatic discharge (ESD) protection circuit

added to significantly improve the ESD human-body

model (HBM) characteristics on the differential input

terminals.

■ High input impedance approximately 8 kΩ

■ Four line receivers per package

■ 400 Mbits/s maximum data rate when used with

Agere Systems Inc. data transmission drivers

The BRS2B is identical to the BRF2A, but has a

preferred state feature that places the output in the

high state when the inputs are open, shorted to

ground, or shorted to the power supply.

■ Meets enhanced small device interface (ESDI)

standards

■ 4.0 ns maximum propagation delay

■ <0.20 V input sensitivity

The BRR1A is equivalent to the BRF1A, but has a

110 Ω resistor connected across the differential

inputs. This eliminates the need for an external

resistor when terminating a 100 Ω impedance line.

This device is designed to work with the DP1A or

PNPA in point-to-point applications.

■ −1.2 V to +7.2 V common-mode range

■ −40 °C to +125 °C ambient operating temperature

range (wider than the 41 Series)

■ Single 5.0 V ± 10% supply

The BRT1A is equivalent to the BRF1A; however, it

is provided with a Y-type resistor network across the

differential inputs and terminated to ground. The

Y-type termination provides the best EMI results.

This device is not recommended for applications

where the differences in ground voltage between the

driver and the receiver exceed 1 V. This device is

designed to work with the DG1A or PNGA in point-to-

point applications.

■ Output defaults to logic 1 when inputs are left

open*

■ Available in four package types

■ Lower power requirement than the 41 Series

Description

The powerdown loading characteristics of the

receiver input circuit are approximately 8 kΩ relative

to the power supplies; hence, they will not load the

transmission line when the circuit is powered down.

For those circuits with termination resistors, the line

will remain impedance matched when the circuit is

powered down.

These quad differential receivers accept digital data

over balanced transmission lines. They translate

differential input logic levels to TTL output logic

levels. All devices in this family have four receivers

with a common enable control. These receivers are

pin equivalent to the general-trade 26LS32, but offer

increased speed and decreased power consumption.

They replace the Agere 41 Series receivers.

The packaging options that are available for these

quad differential line drivers include a 16-pin DIP; a

16-pin, J-lead SOJ; a 16-pin, gull-wing small-outline

integrated circuit (SOIC); and a 16-pin, narrow-body,

gull-wing SOIC.

* This feature is available on BRF1A and BRF2A.

12 3 4 5 6 7...12

中文翻译

下载PDF

与BRF1A相关器件

型号	品牌	获取价格	描述	数据表
BRF1A16E	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
BRF1A16E-TR	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
BRF1A16G	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
BRF1A16G-TR	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
BRF1A16NB	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
BRF1A16NB-TR	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
BRF1A16P	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
BRF1N60	FOSHAN	获取价格	TO-220F
BRF2A	ETC	获取价格	Quad Differential Receivers
BRF2A16E	AGERE	获取价格	Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A

与BRF1A相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

27
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

19
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

49
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

47

产品中心

服务支持

精选活动

关于我们

帮助中心

BRF1A

BRF1A 数据手册

与BRF1A相关器件

与BRF1A相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

BRF1A

BRF1A 数据手册

与BRF1A相关器件

与BRF1A相关文章

您还可以找

您在本页遇到什么问题？