BQ79616-Q1, BQ79616H-Q1, BQ79614-Q1, BQ79612-Q1
www.ti.com
SLUSE81E – AUGUST 2020 – REVISED NOVEMBER 2023
•
Added sourced from TSREF regulator voltage. and Default Reset setting 80% to UT_THR[2:0] and sourced
from TSREF regulator voltage. and Default Reset setting 39% to OT_THR[4:0] in Section 9.5.4.8.5 ..........160
Updated correct register names in Section 9.5.4.13.3 .................................................................................. 172
Added Note to UART_MIRROR_EN in Section 9.5.4.14.2 ........................................................................... 181
Changed cap value to 2.2 μF and fixed isolator pinout in Figure 10-1 ..........................................................193
Changed content, Figure 10-7, Figure 10-8, and Figure 10-9 in Section 10.2.1.2.7.2 .................................. 199
Changed cap values to 2.2 μF in Figure 10-11 ............................................................................................. 202
Changed Figure 12-3 .....................................................................................................................................208
•
•
•
•
•
•
Changes from Revision B (April 2021) to Revision C (June 2021)
Page
•
Changed BQ79614-Q1 and BQ79612-Q1 from Product Preview to Production Data....................................... 1
Changes from Revision A (December 2020) to Revision B (April 2021)
Page
•
•
•
•
•
•
•
•
Added (2) (3) ......................................................................................................................................................11
Added (2) .......................................................................................................................................................... 11
Added (3) .......................................................................................................................................................... 11
Added MAIN_ADC_CAL1, MAIN_ADC_CAL2 register to Section 9.3.2.1.3.1 ................................................ 31
Changed CUST_CRC_LO reset value from 0x73 to 0xF3 in Section 9.5.1 ...................................................114
Added content to MAIN_MODE[1:0] description in Section 9.5.4.5.7 ........................................................... 138
Added content to AUX_MODE[1:0] description in Section 9.5.4.5.9 .............................................................138
Changed From: This bit is set if [MSK_COMP] = 1 To: This bit is set if [MSK_COMP] = 0 for
FAULT_COMP_ADC = in Section 9.5.4.13.1 ................................................................................................ 171
Added content to Common-mode choke and ESD diode (optional) descriptions in Table 10-4 ....................199
Changed content for Transformer description and added content to ESD diode (optional) description in Table
10-5 ............................................................................................................................................................... 199
•
•
Changes from Revision * (August 2020) to Revision A (December 2020)
Page
•
Changed from Advance Information to Production Data....................................................................................1
Copyright © 2023 Texas Instruments Incorporated
Submit Document Feedback
3
Product Folder Links: BQ79616-Q1 BQ79616H-Q1 BQ79614-Q1 BQ79612-Q1
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
