bq24133
www.ti.com
SLUSAF7B –DECEMBER 2010–REVISED MAY 2011
1.6-MHz Synchronous Switch-Mode Li-Ion and Li-Polymer Stand-Alone Battery Charger
with Integrated MOSFETs and Power Path Selector
Check for Samples: bq24133
1
FEATURES
APPLICATIONS
•
1.6MHz Synchronous Switch-Mode Charger
with 2.5A Integrated N-MOSFETs
Up to 92% Efficiency
30V Input Rating with Adjustable Over-Voltage
Protection
•
•
•
•
•
•
•
Tablet PC
Netbook and Ultra-Mobile Computers
Portable Data Capture Terminals
Portable Printers
Medical Diagnostics Equipment
Battery Bay Chargers
•
•
–
4.5V to 17V Input Operating Voltage
Battery Charge Voltage
1, 2, or 3-Cell with 4.2V/Cell
High Integration
•
•
Battery Back-Up Systems
–
DESCRIPTION
–
Automatic Power Path Selector Between
Adapter and Battery
The bq24133 is highly integrated stand-alone Li-ion
and Li-polymer switch-mode battery charger with two
integrated N-channel power MOSFETs. It offers a
constant-frequency synchronous PWM controller with
high accuracy regulation of input current, charge
current, and voltage. It closely monitors the battery
pack temperature to allow charge only in a preset
temperature window. It also provides battery
detection, pre-conditioning, charge termination, and
charge status monitoring. The thermal regulation loop
reduces charge current to maintain the junction
temperature of 120°C during operation.
–
–
–
–
–
Dynamic Power Management
Integrated 20-V Switching MOSFETs
Integrated Bootstrap Diode
Internal Loop Compensation
Internal Digital Soft Start
•
Safety
–
Thermal Regulation Loop Throttles Back
Current to Limit Tj = 120°C
–
–
Thermal Shutdown
Battery Thermistor Sense Hot/Cold Charge
The bq24133 charges a one, two, or three cell Li-Ion
battery in three phases: precondictioning, constant
current, and constant voltage.
Suspend & Battery Detect
–
–
Input Over-Voltage Protection with
Programmable Threshold
Cycle-by-Cycle Current Limit
Charge is terminated when the current reaches 10%
of the fast charge rate. A programmable charge timer
offers a safety back up. The bq24133 automatically
restarts the charge cycle if the battery voltage falls
below an internal threshold, and enters
low-quiescent current sleep mode when the input
voltage falls below the battery voltage.
•
Accuracy
–
–
–
±0.5% Charge Voltage Regulation
±5% Charge Current Regulation
±6% Input Current Regulation
a
•
•
•
Less than 15μA Battery Current with Adapter
Removed
Less than 1.5mA Input Current with Adapter
Present and Charge Disabled
Small QFN Package
The bq24133 features Dynamic Power Management
(DPM) to reduce the charge current when the input
power limit is reached to avoid over-loading the
adapter. A highly-accurate current-sense amplifier
enables precise measurement of input current from
adapter to monitor overall system power.
–
3.5mm × 5.5mm QFN-24 Pin
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2011, Texas Instruments Incorporated