BIAS 1/2 Watt Power Supply
BPW 0.5 Series Data Sheet
Single (Vo) or Dual (Vo & Vr) output
BPW 0.5-08-00, -08-33, -08-50
BPW 0.5-14-00, -14-33, -14-50
Actual Size
Features
The BPW Power Supply Module is an ideal solution for numerous
control applications in lighting, sensing, smart building and power
distribution where operation from 277VAC mains is required. This
low-cost supply provides up to one half watt of output power at 8 or
14 VDC (Vo) and an optional 3.3 or 5 VDC (Vr) output for microproc-
essors, logic, timing circuits, transceivers, sensors or other control
functions. A patented design incorporating a custom integrated cir-
cuit into a small package (0.55 in3 [9.0 cm3]) the BIAS Module pro-
vides an immediate “drop-in” solution, requiring no additional exter-
nal components.
•
•
•
•
•
•
•
•
Universal Input (90-308 VAC, 50/60Hz)
Small Size—0.55in3 [9.0cm3]
Low no-load input power <30mW
Constant power mode, not current limit
3000 VAC Isolation
Up to 75% efficiency
EN 55022, Class B; FCC Part 15, Class B
Meets UL/CSA and EN Product Safety (ITE)
Bias Power AC/DC power supplies are designed to be
applied in two major categories of applications…
Operating Specifications
(@120VAC / 60 Hz / 25°C unless otherwise specified)
Auxiliary, where the Bias supply is one of two or more sup-
plies and provides power for standby, housekeeping, bias-
ing or other requirements. Generally, these supply 3.3V or
5.0V requirements from the Vr output. In some cases a
small amount of Vo power is used.
Electrical
Input Voltage Range
90 - 308 VAC (50/60Hz)
345V, < 30 sec
Input Surge Withstand
0.5 W min. (60Hz)
0.43 W min. (50Hz)
Second is as a main or utility supply where Bias is the only
supply and provides all power necessary for the product or
system. Both Vr and Vo supplies are often utilized for opti-
mum system performance.
Output Power (Pmax)
Efficiency
70% nom.
Output Vo (Peak)
8 or 14 VDC nom. +/- 5%
+/- 1% Po < Pmax
+/- 2% Po < Pmax
The characteristics of the Vo and Vr outputs are different
and each has application-specific benefits which can pro-
vide high value to the system designer.
Line / Load Regulation Vo (Peak)
Temperature Regulation Vo (Peak)
Ripple Vo (@120 Hz)
(@ 100 kHz)
1.00 V p:p
0.25 V p:p
Vo is a voltage-regulated output which has a constant
power mode instead of a conventional current limit. This
output is best suited to drive mechanical relays, solenoids,
SSRs, capacitive loads, indicating lights, LEDs and as a
source for isolated DC utility power which may be used
directly or post-regulated with either a linear regulator or a
DC/DC converter. Vo is self protecting, cannot be over-
loaded and can be shorted indefinitely. The graceful transi-
tion from voltage regulation to constant power along with
the wide range of product ratings, allows the designer to
select a supply tightly matched to the design load. There is
no need to oversize a Bias Power supply. Unlike design-
your-own, or partially complete modules where significant
design margin is required, to stay far away from current
limit, Bias’s constant power alternative requires no such
over-spec’ing.
For Vo = 8V, Ir out 53mA max, Io+Ir ≤ 63mA*
For Vo = 14V, Ir out 23mA max, Io+Ir ≤ 36mA*
Output Vr, 3.3 volt (+/- 5%)
Output Vr, 5.0 volt (+/- 5%)
For Vo = 8V, Ir out 63mA max, Io+Ir ≤ 63mA*
For Vo = 14V, Ir out 28mA max, Io+Ir ≤ 36mA*
No-load Consumption
Isolation
30 mW typical @ Vin=120 VAC
3000 VAC (meets UL / CSA & EN Product Safety)
< 10 uA
Earth Leakage @ 120 VAC
Short Circuit Protection
Continuous, Pin ≤ 0.6 w @ Vin = 120 VAC
> 500 Khr MTBF
Reliability @ 25° C, MIL HDBK-217F
Thermal
Operating Temperature
Operating Relative Humidity
Storage Temperature
Mechanical
-30 to +70° C
Vr is also a voltage-regulated output and is thermally pro-
tected from overload. It has very low output ripple capable
of driving microprocessors, logic, transceivers, sensors and
other elements which require a low-noise, tightly-regulated
supply. In addition, Vr is supplied internally by Vo. This
means that any capacitance added to Vo can increase the
hold-up time of Vr as well.
*Note: maximum currents specified for constant voltage
range only. See V-I curve on page 2 for Vo in constant
power range.
0 – 95%, non-condensing
-40 to +105° C
Package Size
(L x W x H)
1.10 x 0.92 x 0.55 inches
[27.94 x 23.24 x 13.97 mm]
Safety
Safety Compliance
EMI Emissions
UL / EN 60950-1 2nd Ed. (CB Report Available)
EN 55022, Class B, FCC Part 15, Class B
BPW 0.5 Series Data Sheet, Page 1 of 5
BIAS Power
Revised 05/06/2011
www.biaspower.com
Specifications subject to change
5秒后页面跳转
MBRS340T3G手册解读：参数说明、产品特性及应用
PMOS管背靠背连接：串联还是并联？
高压电解电容的分类与选型策略
数码管：基本概念、分类、技术发展及市场趋势
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
