Applicable standard
Operating
Storage
1
1
-40 °C to +85 °C ( 90 %RH Max.)
See below for details.
-40 °C to +85 °C ( 90 %RH Max.)
temperature range
temperature range
Characteristic
impedance
75 Ω( 0 to 12 GHz)
Rating Applicable cable
Finished cable : φ7.7 mm coaxial cable (Reference)
Jacket : φ7.7 mm
Outer conductor : Braided shield
Dielectric core : φ5.7 mm
Inter conductor : (1/1.36), Bare soft copper wire
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 8 mΩ Max.
Outer contact 8 mΩ Max.
1000 MΩ Min.
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 3 GHz.
Frequency 3 to 12 GHz.
Frequency - to - GHz.
No flashover or breakdown.
VSWR 1.29 Max. ( 18 dB Min.)
VSWR 1.43 Max. ( 15 dB Min.)
- dB Max.
X
-
-
-
Insertion loss
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ - by steel gauge.
Insertion force
Extraction force - N Min.
Insertion force - N Max.
- N Max.
-
-
-
-
-
-
-
-
Measured by applicable connector.
5000 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force - N Min.
1)Contact resistance:
Center contact 12 mΩ Max.
Outer contact 12 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
-
-
X
X
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of 30 mm/min. and record the strength at which
the cable or connector breaks.
49 N Min.
X
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 96 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-40 → - → +85 →
- °C
X
X
-
-
30 →
3 →
30 →
3 min.
Under 5 cycles.
Corrosion salt mist
Exposed in 5 % salt water spray for 48 h.
Description of revisions
VSWR 1.29 Max. (Frequency 0 to 3 GHz.)
VSWR 1.43 Max. (Frequency 3 to 12 GHz.)
Count
0
Designed
Checked
Date
TO.KATAYAMA
TO.KATAYAMA
RO.YOKOYAMA
ST.KISHI
20190520
20190520
20190520
20190520
Remark
Note
Approved
Checked
Designed
Drawn
1
Standard of connector without cable.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-382240-00-01
SPECIFICATION SHEET
BNC(75)-P-5.5C-12G
CL302-0091-0-00
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1