Datasheet
AC/DC Converter
Built-in Switching MOSFET
PWM-type DC/DC Converter IC
BM2P10BxJK-Z series
General Description
Key Specifications
◼ Operating Power Supply Voltage Range:
VCC Pin: 8.9 V to 26.0 V
DRAIN Pin: 800 V (Max)
This series of PWM-type DC/DC converters for AC/DC
supplies the optimum system for all products in which
an outlet is present. It is compatible with both insulated
and non-insulated, and various types of low-power
consumption converters can be easily designed.
The built-in 800 V startup circuit contributes to low
power dissipation. A highly flexible power supply design
is achieved by externally installing a current detection
resistor for switching. Because of the use of current
mode control, the current is limited every cycle,
providing excellent performance in bandwidth and
excessive response. The switching frequency is fixed at
100 kHz. When turned light load, the frequency is
reduced to achieve high efficiency. Built-in frequency
hopping function contributes to low EMI. Built-in 800 V
switching MOSFET enables easy designing.
◼ Circuit Current (ON) 1:
BM2P10B1JK-Z: 0.90 mA (Typ)
BM2P10B3JK-Z: 0.65 mA (Typ)
◼ Circuit Current (ON) 2:
◼ Frequency Range 1:
0.30 mA (Typ)
100 kHz (Typ)
◼ Operating Temperature Range: -40 °C to +105 °C
◼ MOSFET ON Resistance:
BM2P10B1JK-Z: 1.6 Ω (Typ)
BM2P10B3JK-Z: 3.5 Ω (Typ)
Package
DIP7K
W (Typ) x D (Typ) x H (Max)
9.27 mm x 6.35 mm x 8.63 mm
Pitch 2.54 mm
Features
◼ PWM Current Mode Control
◼ Frequency Hopping Function
◼ Burst Operation at Light Load
◼ Frequency Reduction Function
◼ Built-in 800 V Startup Circuit
◼ Built-in 800 V Switching MOSFET
◼ VCC UVLO (Under Voltage Lockout)
◼ VCC OVP (Over Voltage Protection)
◼ SOURCE Pin Open Protection
◼ SOURCE Pin Function of Leading Edge Blanking
◼ Over Current Detection Function per Cycle
◼ Over Current Detection AC Compensation Function
◼ Soft Start Function
Lineup
MOSFET
ON
resistance
1.6 Ω
3.5 Ω
VH
UVLO
Product Name
VH OVP
○
○
○
○
BM2P10B1JK-Z
BM2P10B3JK-Z
Output Power (POUT)
◼ Secondary Over Current Protection Circuit
POUT (Note 1)
Product Name
AC 230 V
AC 85 V to AC 264 V
BM2P10B1JK-Z
BM2P10B3JK-Z
28 W
24 W
24 W
16 W
(Note 1) Output power affects external components and thermal design.
Therefore, it may be smaller than the stated value.
Applications
Major Appliance, Office Automation Equipment, AV
Equipment, other SMPS etc.
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays.
www.rohm.com
© 2023 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0F1F0A100120-1-2
03.Oct.2023 Rev.001
1/27