Datasheet > BM2540-7PD6AHFU

BM2540-7PD6AHFU

更新时间： 2024-11-22 03:36:55

品牌	Logo	应用领域
BEL		/
页数	文件大小	规格书
24页	536K
描述
DC-DC Regulated Power Supply Module, 2 Output, 50W, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

BM2540-7PD6AHFU 数据手册

M-Family

DC-DC Converters <100 W

Rugged Environment

50 W DC-DC (AC-DC) Converters

M-Family

Class I Equipment

Single output: series AM...LM 1000

Dual output:

series AM...LM 2000

Triple output: series AM...LM 3000

Class II Equipment (double insulation)

Single output: series CMZ/DMZ/LMZ 1000

Dual output:

series CMZ/DMZ/LMZ 2000

Triple output: series CMZ/DMZ/LMZ 3000

• Extremely wide input voltage range suitable for

battery (and AC) operation

• Efficient input filter and built-in surge and transient

suppression circuitry

• 4 kV_rmsinput to output electric strength test

• Outputs individually isolated and controlled

• Outputs fully protected against overload

Safety according to IEC 950

LGA

Table of Contents........................................... Page

Description .................................................................. 7 - 2

Type Survey ................................................................ 7 - 3

Safety and Installation Instructions ............................. 7 - 4

Functional Description................................................. 7 - 6

Electrical Input Data .................................................... 7 - 7

Electrical Output Data ................................................. 7 - 9

EMC and Immunity to Input Transients ..................... 7 - 13

Supplementary Data ................................................. 7 - 15

Description of Options............................................... 7 - 16

Immunity to Environmental Conditions...................... 7 - 22

Mechanical Data ....................................................... 7 - 24

Type Key and Product Marking ................................. 7 - 25

Description

The M-family of DC-DC (AC-DC) converters represents a

broad and flexible range of power supplies for use in ad-

vanced industrial electronic systems. Features include high

efficiency, reliability, low output voltage noise and excellent

dynamic response to load/line changes due to individual

regulation of each output.

to output isolation is provided. The modules are designed

and built according to the international safety standard

IEC 950 and have been approved by the safety agencies

LGA (Germany) and UL (USA). The UL Mark for Canada

has been officially recognized be regulatory authorities in

provinces across Canada.

The converter inputs are protected against surges and tran-

sients occuring at the source lines. An input over- and

undervoltage cut-out circuitry disables the outputs if the in-

put voltage is outside the specified range. Certain types in-

clude an inrush current limitation preventing circuit break-

ers and fuses from being damaged at switch-on.

The case design allows operation at nominal load up to

71°C in a free air ambient temperature. If forced cooling is

provided, the ambient temperature may exceed 71°C but

the case temperature should remain below 95°C under all

conditions.

A temperature sensor generates an inhibit signal which

disables the outputs if the case temperature T_Cexceeds the

limit. The outputs are automatically re-enabled when the

temperature drops below the limit.

All outputs are open- and short-circuit proof and are pro-

tected against overvoltages by means of built-in suppres-

sor diodes. The outputs can be inhibited by a logic signal

applied to the connector pin 2 (i). If the inhibit function is not

used pin 2 should be connected with pin 23 to enable the

outputs.

Various options are available to adapt the converters to in-

dividual applications.

The modules may either be plugged into 19 inch rack sys-

tems according to DIN 41494, or be chassis mounted.

LED indicators display the status of the converter and allow

visual monitoring of the system at any time.

Case: aluminium, black finish, self cooling.

Dimensions: 38.7 × 111.2 × 168.5 mm. Weight: 770 g.

Full input to output, input to case, output to case and output

7 - 2

MELCHER

The Power Partners.

12 3 4 5 6 7...24

中文翻译

下载PDF

与BM2540-7PD6AHFU相关器件

型号	品牌	获取价格	描述	数据表
BM2540-7PD6F	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BM2540-7PD6H	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, METAL, CASE M02, MODULE
BM2540-7PD6HF	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BM2540-7PD7	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BM2540-7PD7A	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BM2540-7PD7AF	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BM2540-7PD7AFU	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL,
BM2540-7PD7AH	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BM2540-7PD7AHF	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BM2540-7PD7AHFU	BEL	获取价格	DC-DC Regulated Power Supply Module, 2 Output, 50W, 168.50 X 111.20 MM, 38.70 MM HEIGHT, M

与BM2540-7PD6AHFU相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

31
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

22
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

51
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

50

产品中心

服务支持

精选活动

关于我们

帮助中心

BM2540-7PD6AHFU

BM2540-7PD6AHFU 数据手册

与BM2540-7PD6AHFU相关器件

与BM2540-7PD6AHFU相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

BM2540-7PD6AHFU

BM2540-7PD6AHFU 数据手册

与BM2540-7PD6AHFU相关器件

与BM2540-7PD6AHFU相关文章

您还可以找

您在本页遇到什么问题？