Noise Suppression Products/EMI Suppression Filters
2. Mechanical Performance
No.
Item
Specifications
Test Methods
Appearance and
Dimensions
1
Meet dimensions.
Visual Inspection and measured with Slide Calipers
Flux : Ethanol solution of rosin,25 (wt)%
Pre-heat : 150±5 °C, 60±5 s
The electrodes should be at least 75% covered with
new solder coating.
Solder : Sn/Pb = 60/40
Solder Temperature : 230±5 °C
Immersion Time : 4±1 s
2
3
Solderability
Immersion and emersion rates : 25mm / s
Flux : Ethanol solution of rosin,25 (wt)%
Pre-heat : 150±5 °C, 60±5 s
Solder : Sn/Pb = 60/40
Solder Temperature : 270±5 °C
(for NFE61HT332Z2A9p : 250±5°C)
Immersion Time : 10±1 s
Resistance to
soldering heat
Immersion and emersion rates : 25 mm/s.
Meet Table 3.
Table 3
It should be soldered on the Paper-phenol substrate. (t=1.6mm)
Pressure jig
Appearance
No damaged
33, 68, 100, 180,
360, 680 (pF)
R340
F
within±15%
within±30%
Deflection
4
5
Bending Strength
Cap. Change
45
45
Product (in mm)
1000, 3300 (pF)
Deflection : 3 mm
Keeping Time : 30 s
Oscillation Frequency : 10 to 2000 to 10Hz for 20 min
Total Amplitude : 1.5 mm or Acceleration amplitude 49m/s2
whichever is smaller
Vibration
Testing Time : A period of 2 hours on each of 3 mutually
perpendicular directions (Total 6 hrs.)
3. Environment Performance (It should be soldered on the substrate.)
No.
Item
Specifications
Test Methods
Temperature : 85±2 °C
Humidity : 85 % (RH)
1
Humidity
Heat Life
Time : 1000 hrs. (+48 hrs. , -0 hr.)
Then measured after exposure in the room condition for 4 to
48 hrs..
Meet Table 4.
Table 4
Appearance
No damaged
Temperature : 125±2 °C
Test Voltage :
33, 68, 100, 180,
360, 680 (pF)
within±15%
Cap. Change
33,68,100,180,360,680 (pF) : Rated Voltage x 200%
1000,3300 (pF) : Rated Voltage x 150%
Time : 1000 hrs. (+48hrs. , -0hr.)
Then measured after exposure in the room condition for 4 to
48 hrs..
1000, 4700 (pF)
within±30%
2
3
I. R.
Withstanding
Voltage
100 MΩ min.
No damaged
Temperature : -55±2 °C
Time : 500 hrs. (+24hrs., -0hr.)
Cold Resistance
1 Cycle
1step : -55°C (+0°C, -3°C) / 30±3 min.
2step : Room Temperature / within 5 min.
3step : +125°C (+3°C, -0°C) / 30±3 min.
4step : Room Temperature / within 5 min.
Total of 500 cycles
4
Temperature Cycling
Meet Table 2
Then measured after exposure in the room condition for 4 to
48 hrs..
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification
before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.
• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.
!Note