Noise Suppression Products/EMI Suppression Filters
Chip LC Combined
T-type Chip EMIFILr NFE61H Series
Equivalent Circuit
0.7±0.2
2.6±0.3
0.7±0.2
(1)
(2)
(3)
Input
(1)
Output
(3)
+0.3
6.8
-0.5
1.6±0.3
GND
(2)
No polarity.
(in mm)
Part Number
Capacitance
Rated Voltage
Withstanding Voltage
Rated Current
Insulation Resistance
NFE61HT330U2A9
NFE61HT680R2A9
NFE61HT101Z2A9
NFE61HT181C2A9
NFE61HT361C2A9
NFE61HT681D2A9
NFE61HT102F2A9
NFE61HT332Z2A9
33pF±30%
68pF±30%
100pF±30%
180pF±30%
360pF±20%
680pF±30%
100V (DC)
100V (DC)
100V (DC)
100V (DC)
100V (DC)
100V (DC)
100V (DC)
100V (DC)
250V (DC)
250V (DC)
250V (DC)
250V (DC)
250V (DC)
250V (DC)
250V (DC)
250V (DC)
2A (DC)
2A (DC)
2A (DC)
2A (DC)
2A (DC)
2A (DC)
2A (DC)
2A (DC)
1000Mohm min.
1000Mohm min.
1000Mohm min.
1000Mohm min.
1000Mohm min.
1000Mohm min.
1000Mohm min.
1000Mohm min.
1000pF +80, -20%
3300pF +80, -20%
Operating Temperature : -55 to +125 °C
Storage Temperature : -55 to +125 °C
■ Standard Testing Condition
<Unless otherwise specified>
<In case of doubt>
Temperature : Ordinary Temp. 15 to 35°C
Humidity : Ordinary Humidity 25 to 85% (RH)
Temperature : 20±2°C
Humidity : 60 to 70% (RH)
Atmospheric pressure : 86 to 106kPa
■ Specifications
1. Electrical Performance
No.
Item
Specifications
Test Methods
Table 1
Capacitance
33,68,100 (pF)
Voltage
1 to 5 V (rms) 1MHz±10%
Frequency
1
Capacitance
Meet rating table above
180, 360, 680, 1000, 3300 (pF) 1±0.2 V (rms) 1kHz±10%
Insulation Resistance
(I. R. )
Voltage : 100 V (DC)
Charging Time : 60±5s
Meet rating table above
2
3
Test Voltage : 250 V (DC)
Testing Time : 1 to 5 s
Withstanding Voltage
Products should not be damaged.
Charge/Discharge current : 10mA max.
Attenuating transient voltage of exponential function should be
applied to products on the condition.
Meet Table 2.
Table 2
Relay
10 ohm
Appearance
No damaged
1
100 ohm
33, 68, 100, 180,
360, 680 (pF)
1000, 3300 (pF)
EB
Filter
2 3
Resistance to
Surge Voltage
0.47µF
within±15%
4
Cap. Change
within±30%
EB 400V
I. R.
Withstanding
Voltage
Meet rating table above.
Peak Voltage : 400 V
Force Period : 1 s
No damaged
The number of Surges : 105
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification
before ordering. Especially, please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in them to prevent smoking and/or burning, etc.
• You are able to read a detailed specification in the website (http://search.murata.co.jp/) before to require our product specification or to transact the approval sheet for product specification.
!Note