®
Bussmann
Universal In-Line Fuseholder
For 1/4” x 7/8”, 1” and 1-1/4” Fuses
32 Volts, 30 Amps
HHB
Installation
Step 1.
Step 2.
CATALOG SYMBOL: HHB FUSEHOLDER
30 AMPERES
32 VOLTS AC
For use with 1/4” x 7/8”, 1” and 1-1/4” Fuses
(6.35mm x 22.2, 25.4mm and 31.8mm)
Materials:
Nylon body
Tin plated copper contacts
5 lbs. minimum to separate fuseholder
housing with fuse installed.
Pull Force:
U.L. Flammabillity: 94 V2
Catalog Numbers
Holder (Without Leads)
Description
Step 3.
Catalog Number
HHB
Standard Pack (10-in)
Bulk Pack (100-in)
BK/HHB
1. Strip insulation from wire (approximately 3/8-inch).
2. Insert wire in holder.
Holder With Pre-attached Lead Wires
(#14 Insulated)
3. Crimp terminal through body.*
4. Repeat steps 1-3 for other half of holder.
5. Insert fuse.
Wire Color
Yellow
Red
19” Length
8” Length
BK/HHB-Y419
BK/HHB-R419
BK/HHB-B419
BK/HHB-Y408
BK/HHB-R408
BK/HHB-B408
6. Snap housing together.
*Recommended Crimping Tools:
Black
Thomas & Betts No. WT-1300; Radio Shack No. 64-409; General Electric–
U.S. & Metric Electrical Terminal Tool.
Dimensional Data
L
• Rated 30 amps, 32 volts AC.
• An economical and versatile nylon fuseholder for normal
environments.
0.53"
(13.5mm)
• Accepts #12 to #18 wire leads (not provided with basic fuse-
holder).
• 1/4” diameter fuse sizes:
1/4” x 7/8” (AGW);
Fuse Length
“L” with fuse installed
2.100 Max.
7/8”
1”
2.250 Max.
1/4” x 1” (AGX);
1-1/4”
2.420 Max.
1/4 x 1-1/4” (AGC, MDL, etc.):
• Simple crimp assembly.
• “Snap-Lock” featue provides strong positive union of fuse-
holder housing.
• High visibility yellow color for easy identification in dark or
hard-to-access locations.
• Important information molded-in.
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
Form No. HHB
Page 1 of 1
BIF Doc #2103
2-21-00
N99130
Rev. A