MKP 338 2 X2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
Insulation resistance
106
105
104
80
0
20
40
60
100
amb
T
(°C)
APPLICATION NOTES
• For X2 electromagnetic interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum
mains voltage of 310 Vac
• For series impedance applications we refer to the application note www.vishay.com/doc?28153
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C ≤ 470 nF and 110 °C for
C > 470 nF
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 Vdc and
divided by the applied voltage.
INSPECTION REQUIREMENTS
GENERAL NOTES
1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC Publication
IEC 60384-14 ed-3 and “Specific Reference Data”
Group C inspection requirements
SUB-CLAUSE NUMBER AND
CONDITIONS
PERFORMANCE REQUIREMENTS
TEST
SUB-GROUP C1A PART OF
SAMPLE OF SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapters “General Data” of this
specification
Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz
For C > 1 µF at 1 kHz
Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
4.3
Robustness of
terminations
No visible damage
Document Number: 28119
Revision: 16-Jul-09
For technical questions, contact: rfi@vishay.com
www.vishay.com
158