BD9361GUL
Datasheet
Power LSI series for Digital Camera and Digital Video Camera
6ch Internal Power MOSFET
System Switching Regulator + 1ch LDO
BD9361GUL
●Outline
●Function block diagram
6-Channel Switching Regulator Controller for Digital Camera
FET
FET
that contains an internal FET, and 1-Channel LDO.
It is optimal power supply composition for Digital Camera or
Digital Video Camera which carries CMOS sensor.
It contributes to mounting area reduction, because CH1~CH4
have built-in feedback resister and WL-CSP of compact
package is adopted.
Motor
5.0V (typ.)
Step UP
DC/DC1
FET
FET
Buck-boost
DC/DC2
System/Analog
3.3V (typ.)
FET
FET
●Features
1) 2.5V minimum input operating, and Supplies power for the
internal circuit by step-up converter(CH1).
2) CH1 step-up converter, CH2 cross converter, CH3,4
step-down converter CH5 step-down converter
controllable output voltage by external resister.CH6 boost
converter for LED,
FET
FET
Core
1.1V (typ.)
Step Down
DC/DC3
FET
FET
Step Down
DC/DC4
Memory
1.8V/1.5V(typ.)
3) All channels contain internal Power MOSFET and
compensation.
4) Operating frequency of 2.0 MHz (CH3,4,5) and 1.0MHz
FET
FET
Step Down
DC/DC5
CMOS sensor/etc.
1.8V (typ.)
(CH1,2,6).
5) Includes Over Voltage Protection (OVP) for CH1, 2, 6.
6) Includes LDO controllable output voltage by serial
communication.
CMOS sensor/etc.
2.8V (typ.)
FET
FET
LDO
7) Contains sequence control circuit for CH1~3. It is
Step UP
DC/DC6
(Constant
possible to select sequence CH1⇒CH3⇒CH4⇒CH2 and
CH1⇒CH4⇒CH3⇒CH2 by SEQ_CTL pin CH1, 2, 3, 4.
CH5, 6, and LDO are possible to turn ON/OFF by serial
communication.
Load
switch
Current control)
8) Built-In discharge switch (CH2,3,4) and contains off
sequence control circuit for CH1~4 with inverted start-up
sequence.
LED Back light
I2C
Interface
9) Included cut off output voltage circuit during over current
(timer latch type).
10) Include back-gate control for CH1 with soft start function
Fig1. Function block diagram
●package
WLCSP package(3.14mm×3.14mm 0.5mm pitch)
●Use
For Digital Camera, Digital Video Camera
●PIN Assignments (TOP VIEW)
●Key Specifications
・Input voltage accuracy :
2.5V~5.5V
・Output voltage
CH1 output voltage:
CH2 output voltage:
CH3 output voltage:
CH4 output voltage (VOSEL4=H):
CH4 output voltage (VOSEL4=L):
CH5 reference voltage:
CH6 reference voltage:
LDO output voltage:
・Load current
5.0V±1.5%(typ.)
3.3V±1.5% (typ.)
1.1V±1.5% (typ.)
1.8V±1.5% (typ.)
1.5V±1.5% (typ.)
0.8V±1.25% (typ.)
0.4V±5.0% (typ.)
2.8V±1.5% (typ.)
CH1 load current:
1.0A (max)
CH2 load current:
CH3 load current:
CH4 load current:
CH5 load current:
CH6 load current:
LDO load current:
・Frequency(CH3,4,5):
800mA (max)
1.5A (max)
800mA (max)
500mA (max)
50mA (max)
200mA (max)
2.0MHz(typ.)
Fig2. PIN Assignments
・Frequency (CH1,2,6):
1.0MHz(typ.)
○Products:Silicon monolithic IC ○This product is not designed for normal operation with in a radioactive
Status of this document
The Japanese version of this document is the official specification. Please use the translation version of this document as a reference to expedite understanding of the official version.
If these are any uncertainty in translation version of this document, official version takes priority.
www.rohm.com
TSZ02201-0Q2Q0A400010-1-2
2011.12.22 Rev.001
© 2011 ROHM Co., Ltd. All rights reserved.
1
TSZ22111・14・001