Nano EnergyTM
Datasheet
Voltage Detector (Reset) IC Series for Automotive Application
Supervisory IC
BD70Hxx-xC Series BD73Hxx-2C Series
General Description
Key Specifications
ROHM's Supervisory ICs are highly accurate, with ultra-
low current consumption feature that uses CMOS
process. The lineup includes N-channel open drain
output (BD70Hxx-xC) and CMOS output (BD73Hxx-2C)
so that the users can select depending on the application.
Because there is no hysteresis, the Release Voltage is
set to same value of Detection Voltage.
◼ Release Voltage:
3.76 V, 3.66 V, 3.56 V, 3.46 V, 3.06 V, 1.20V
◼ Ultra-Low Current Consumption:
270 nA (Typ)
-40 °C to +125 °C
◼ Operation Temperature Range:
Special Characteristics
◼ Release Voltage Accuracy:
±50 mV (-40 °C to +125 °C)
Features
◼ AEC-Q100 Qualified (Note 1)
◼ No Hysteresis
Package
W (Typ) x D (Typ) x H (Max)
2.90 mm x 2.80 mm x 1.25 mm
SSOP5:
◼ Two Output Types
(Nch Open Drain and CMOS Output)
◼ Nano Energy
◼ Very Small, Lightweight and Thin Package
◼ Package SSOP5 is similar to SOT-23-5 (JEDEC)
(Note 1) Grade 1
Application
All automotive devices that requires voltage detection
Typical Application Circuits
VDD1
VDD2
VDD1
RL
Microcontroller
RST
Microcontroller
RST
BD70Hxx-xC
BD73Hxx-2C
CVDD
CVDD
(Noise-reduction
Capacitor)
(Noise-reduction
Capacitor)
CL
CL
GND
GND
Figure 1. Open Drain Output Type
BD70Hxx-xC Series
Figure 2. CMOS Output Type
BD73Hxx-2C Series
Pin Configuration
SSOP5
TOP VIEW
N.C.
N.C.
VOUT VDD GND
Pin Description
SSOP5
PIN NAME
PIN No.
Function
Output pin
1
2
3
4
5
VOUT
VDD
GND
N.C.
Power supply voltage
GND
No connection pin
No connection pin
The no connection pin is electrically open and
can be connected to either VDD or GND.
N.C.
Nano Energy™ is a trademark or a registered trademark of ROHM Co., Ltd.
○Product structure:Silicon integrated circuit ○This product has no designed protection against radioactive rays
www.rohm.com
© 2017 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0GIG2G300030-1-2
28.Jun.2021 Rev.004
1/17