B43713, B43733
Very long useful life ꢀ 85 °C
Ripple current capability
Due to the ripple current capability of the capacitor contact elements, the following current upper
limits must not be exceeded in case of the absence of any forced cooling around the capacitor
and its contact elements:
Capacitor diameter
IAC,max
51.6 mm
34 A
64.3 mm
57 A
76.9 mm
74 A
90 mm
89 A
In the event of the availability of cooling (e.g. forced air around the capacitor body, forced air
around the contact elements, capacitor base cooling by a heat sink) however above limits may be
exceeded depending on the cooling conditions. For details please contact our sales offices.
Dimensional drawings
B43713
B43733
Ring clip/clamp mounting
Threaded stud mounting
Positive pole marking: +
For standard types with threaded stud the base is not insulated. Also refer to the mounting in-
structions in chapter "Capacitors with screw terminals ꢀ accessories" on page 21.
Screw terminals with UNF threads are available upon request.
For information regarding dimensions and weights, packing, special designs and design options,
refer to chapter "Capacitors with screw terminals ꢀ general information" on page 14.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 34