5秒后页面跳转
B32344E5201A020 PDF预览

B32344E5201A020

更新时间: 2024-04-09 18:59:38
品牌 Logo 应用领域
东电化 - TDK /
页数 文件大小 规格书
10页 608K
描述
Output[50Hz] = 16.7kvarOutput[60Hz] = 20kvar

B32344E5201A020 数据手册

 浏览型号B32344E5201A020的Datasheet PDF文件第4页浏览型号B32344E5201A020的Datasheet PDF文件第5页浏览型号B32344E5201A020的Datasheet PDF文件第6页浏览型号B32344E5201A020的Datasheet PDF文件第7页浏览型号B32344E5201A020的Datasheet PDF文件第9页浏览型号B32344E5201A020的Datasheet PDF文件第10页 
Film Capacitors – Power Factor Correction  
PhiCap capacitors  
B32344E5201A020  
MKP525-D-16.7  
Overpressure disconnector  
To ensure full functionality of an overpressure disconnector, the following must be observed:  
1. The elastic elements must not be hindered, i.e.  
Connecting lines must be flexible leads (cables).  
There must be sufficient space (min. 12 mm) for expansion above the connections. This will  
enable a longitudinal extension of the can to secure the overpressure disconnector work.  
Folding beads must not be retained by clamps.  
2. The maximum allowed fault current of 10000 A in accordance with UL 810 standard must be  
assured by the application.  
3. Stress parameters of the capacitor must be within the IEC60831 specification.  
Overcurrent and short circuit protection  
Use HRC fuses or MCCBs for short circuit protection. Short circuit protection and connecting  
cables should be selected so that 1.5 times the rated capacitor current can be permanently  
handled.  
HRC fuses do not protect a capacitor against overload – they are only for short circuit protection.  
The HRC fuse rating should be 1.6 to 1.8 times rated capacitor current.  
Do not use HRC fuses to switch capacitors (risk of arcing).  
Use thermal magnetic over current relays for overload protection.  
Resonance cases  
Resonance cases must be avoided by appropriate application design in any case. Maximum total  
RMS capacitor current (incl. fundamental harmonic current) specified in technical data must not be  
exceeded.  
Re-switching vs. phase-opposition  
In case of voltage interruption, a sufficient discharge time has to be ensured to avoid phase-  
opposition and resulting high inrush currents.  
Vibration resistance  
The resistance to vibration of capacitors corresponds to IEC 68, part 2–6.  
Max. test conditions:  
Test duration  
6 h*  
Frequency range 1  
10 ... 55 Hz*  
0.75 mm*  
Displacement amplitude  
*corresponding to max. 98.1 m/s or 10 g  
FILM PFC PM  
June 2011  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 8 of 10  

与B32344E5201A020相关器件

型号 品牌 描述 获取价格 数据表
B32344E5202A020 EPCOS CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 79uF, STUD MOUNT, CAN

获取价格

B32344E5202A020 TDK Output[50Hz] = 20.8kvarOutput[60Hz] = 25kvar

获取价格

B32344E6051A000 TDK Output[50Hz] = 4.2kvarOutput[60Hz] = 5kvar

获取价格

B32344E6051A060 TDK Output[50Hz] = 4.2kvarOutput[60Hz] = 5kvar

获取价格

B32344E6061A300 EPCOS CAPACITOR, FILM/FOIL, POLYPROPYLENE, 600V, 48uF, CHASSIS MOUNT

获取价格

B32344E6061A300 TDK Output[50Hz] = 5.3kvarOutput[60Hz] = 6.3kvar

获取价格