Datasheet > B12JH-JH

B12JH-JH

更新时间： 2024-02-01 17:04:51

品牌	Logo	应用领域
OHMITE		/
页数	文件大小	规格书
8页	258K
描述
General Specifications

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

B12JH-JH 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Active	Reach Compliance Code：	unknown
风险等级：	5.66	连接器类型：	COMBINATION LINE CONNECTOR
联系完成配合：	TIN LEAD OVER COPPER	联系完成终止：	TIN LEAD OVER COPPER
触点性别：	MALE	触点材料：	BRASS
DIN 符合性：	NO	空壳：	NO
滤波功能：	NO	IEC 符合性：	NO
JESD-609代码：	e0	MIL 符合性：	NO
混合触点：	NO	安装类型：	BOARD
选件：	GENERAL PURPOSE	外壳材料：	POLYAMIDE66
端接类型：	SOLDER	触点总数：	12
UL 易燃性代码：	94V-0	Base Number Matches：	1

B12JH-JH 数据手册

Series B

Process Sealed Subminiature Antistatic Toggles

^AGeneral Speciﬁcations

Electrical Capacity (Resistive Load)

Logic Level: 0.4VA maximum @ 28V AC/DC maximum

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

Note: Find additional explanation of operating range in Supplement section.

Other Ratings

Contact Resistance: 50 milliohms maximum

Insulation Resistance: 500 megohms minimum @ 500V DC

Dielectric Strength: 500V AC minimum for 1 minute minimum

Mechanical Life: 100,000 operations minimum for On-None-On & On-Off-On

50,000 operations minimum for other circuits

50,000 operations minimum for locking lever models

Electrical Life: 50,000 operations minimum

Nominal Operating Force: Toggles A, A1, E & K with Long Paddle: 1.47N (momentary); 1.18N (maintained)

Toggles J & H & K with Short Paddle: 2.72N (momentary); 1.84N (maintained)

Toggle L: 0.59N

Contact Timing: Nonshorting (break-before-make)

Angle of Throw: 26°

Materials & Finishes

Toggle: Nickel plated brass

Bushing: Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing

Gasket: Nitrile butadiene rubber

Case Housing: Glass ﬁber reinforced polyamide

Support Bracket: Tin plated phosphor bronze

Movable Contact: Phosphor bronze with gold plating

Stationary Contacts: Copper alloy with gold plating

Terminals: Copper alloy with gold plating

Environmental Data

Operating Temperature Range: –30°C through +85°C (–22°F through +185°F)

Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning

in 1 minute; 3 right angled directions for 2 hours

Shock: 50G (490m/s²) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Installation

Mounting Torque: .30 ~ .45Nm (2.65 ~ 3.98 lb•in) for A1 actuator with threaded bushing only

PCB Processing

Soldering: Wave Soldering Recommended: See Proﬁle A in Supplement section.

Manual Soldering: See Proﬁle A in Supplement section.

Cleaning: Automated cleaning. See Cleaning speciﬁcations in Supplement section.

Standards & Certifications

Flammability Standards: UL94V-0 available

The B Series toggles have not been tested for UL recognition or CSA certiﬁcation.

These switches are designed for use in a low-voltage, low-current, logic-level circuit.

When used as intended in a logic-level circuit, the results do not produce hazardous energy.

A12

www.nkk.com

12 3 4 5 6 7 8

中文翻译

下载PDF

与B12JH-JH相关器件

型号	品牌	获取价格	描述	数据表
B12JJHC	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJHCF	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJHD	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJHF	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJPC	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJPC_12	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJPCF	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJPD	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJPF	NKK	获取价格	Subminiature Fully Illuminated Toggles
B12JJVC	NKK	获取价格	Subminiature Fully Illuminated Toggles

与B12JH-JH相关文章

压敏电阻器在直流电路中的过压保护应用探讨
2024-06-07

1
电感耐压值及其与电感大小的关系
2024-06-07

4
CNY17F光耦合器：特性、应用、封装、引脚功能及替换型号解析
2024-06-07

3
DS1307资料解析：特性、引脚说明、替代推荐
2024-06-07

2

产品中心

服务支持

精选活动

关于我们

帮助中心

B12JH-JH

B12JH-JH 技术参数

B12JH-JH 数据手册

与B12JH-JH相关器件

与B12JH-JH相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

B12JH-JH

B12JH-JH 技术参数

B12JH-JH 数据手册

与B12JH-JH相关器件

与B12JH-JH相关文章

您还可以找

您在本页遇到什么问题？