Datasheet > B12JJPC_12

B12JJPC_12

更新时间： 2022-06-12 12:08:21

品牌	Logo	应用领域
日本长野 - NKK		/
页数	文件大小	规格书
4页	434K
描述
Subminiature Fully Illuminated Toggles

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

B12JJPC_12 数据手册

Series B

Subminiature Fully Illuminated Toggles

^AGeneral Speciﬁcations

Electrical Capacity (Resistive Load)

Logic Level: 0.4VA maximum @ 28V AC/DC maximum

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

Note: Find additional explanation of operating range in Supplement section.

Other Ratings

Contact Resistance: 50 milliohms maximum

Insulation Resistance: 500 megohms minimum @ 500V DC

Dielectric Strength: 500V AC minimum for 1 minute minimum

Mechanical Life: 100,000 operations minimum

Electrical Life: 50,000 operations minimum

Nominal Operating Force: 1.18N

Contact Timing: Nonshorting (break-before-make)

Angle of Throw: 26°

Materials & Finishes

Actuator: Polyamide

Bushing Housing: Polyamide

Case Housing: Glass ﬁber reinforced polyamide

Support Bracket: Phosphor bronze with tin plating

Movable Contact: Phosphor bronze with gold plating

Stationary Contacts: Brass with tin plating

Terminals: Brass with gold plating

Environmental Data

Operating Temperature Range: –25°C through +55°C (–13°F through +131°F)

Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)

Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range

& returning in 5 minutes; 3 right angled directions for 2 hours

Shock: 50G (490m/s²) acceleration (tested in 3 right angled directions, with 5 shocks in each direction)

PCB Processing

Soldering: Wave Soldering recommended. See Proﬁle A in Supplement section.

Manual Soldering: See Proﬁle A in Supplement section.

Cleaning: Automated alcohol based cleaning recommended, 5 minutes maximum. Do not use high-purity

alcohol (50% alcohol or more) or organic solvent. High alcohol solution can damage clear plastic.

See Cleaning speciﬁcations in Supplement section.

Standards & Certifications

The B Series illuminated toggles have not been tested for UL recognition or CSA certiﬁcation.

These switches are designed for use in a low-voltage, low-current, logic-level circuit.

When used as intended in a logic-level circuit, the results do not produce hazardous energy.

A20

www.nkk.com

12 3 4

下载PDF

与B12JJPC_12相关器件

型号	品牌	描述	获取价格	数据表
B12JJPCF	NKK	Subminiature Fully Illuminated Toggles	获取价格
B12JJPD	NKK	Subminiature Fully Illuminated Toggles	获取价格
B12JJPF	NKK	Subminiature Fully Illuminated Toggles	获取价格
B12JJVC	NKK	Subminiature Fully Illuminated Toggles	获取价格
B12JJVCF	NKK	Subminiature Fully Illuminated Toggles	获取价格
B12JJVD	NKK	Subminiature Fully Illuminated Toggles	获取价格