AZ6962
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• High sensitivity, 120 mW pickup
• Dielectric strength 5000 Vrms
• Isolation spacing greater than 10 mm
• 10kV surge voltage
• Proof tracking index (PTI/CTI) 250
• 10 Amp switching capability
• Epoxy sealed
• UL, CUR file E43203
• VDE file 40010953
CONTACTS
GENERAL DATA
Arrangement
SPDT (1 Form C), DPDT (2 Form C)
SPST (1 Form A)
Life Expectancy
Mechanical
Electrical
Minimum operations
3 x 107
1 x 105 at 8 A 250 VAC res.
Ratings
Resistive load:
Max. switched power: 240 W or 2500 VA
(2 Form C: 150 W or 1250 VA)
Max. switched current: 10 A
Operate Time (typical) 7 ms at nominal coil voltage
(2 Form C: 5 A)
Release Time (typical) 3 ms at nominal coil voltage
Max. switched voltage: 240 VDC* or 440 VAC
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Dielectric Strength
(at sea level for 1 min.) 2500 Vrms between contact sets
5000 Vrms coil to contact
1500 Vrms between open contacts
Rated Load
UL, CUR
10 A at 250 VAC resistive, 30k cycles (1 Form C)
10 A at 30 VDC resistive, 30k cycles (1 Form C)
B300, R300 Pilot Duty (1 Form C)
1/2 HP at 240 VAC, 30k cycles (N.O.)
1/3 HP at 120 VAC, 30k cycles (N.O.)
5 A at 250 VAC resistive, 30k cycles
(2 Form C)
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
VDE
8 A at 250 VAC resistive, 100k cycles
(1 Form A, and 1 Form C)
Vibration
Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
Material
Silver tin oxide
Shock
10 g
COIL
Enclosure
P.B.T. polyester, UL94 V-O
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Power
Terminals
At Pickup Voltage
(typical)
120 mW (up to 24 VDC coil) (1 pole)
140 mW (48 VDC and 60 VDC coil)
(1 pole)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
176 mW (2 pole)
Max. Continuous
Dissipation
1.2 W at 20°C (68°F) ambient
80°C (176°F)
Max. Immersion Time 30 seconds
Weight 8 grams
Temperature Rise
Temperature
20°C (36°F) at nominal coil voltage
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
9/27/06W