AZ6962
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• High sensitivity, 120 mW pickup
• Dielectric strength 5000 Vrms
• Isolation spacing greater than 10 mm
• Proof tracking index (PTI/CTI) 250
• 10 Amp switching capability
• Epoxy sealed version available
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E43203
• VDE file 40010953
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
3 x 107
1 x 105 at 8 A 250 VAC res.
Arrangement
SPDT (1 Form C), DPDT (2 Form C)
SPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Operate Time (typical) 7 ms at nominal coil voltage
Max. switched power: 240 W or 2500 VA
(2 Form C: 150 W or 1250 VA)
Max. switched current: 10 A
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
(2 Form C: 5 A)
Max. switched voltage: 240* VDC or 440 VAC
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 2500 Vrms between contact sets
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Rated Load
UL, CUR
10 A at 250 VAC resistive, 30k cycles [1], [2], [3]
10 A at 30 VDC resistive, 30k cycles [1], [2], [3]
B300, R300
5 A at 250 VAC resistive, 30k cycles [1], [2], [3]
(2 Form C)
Insulation
C250
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 10% of nominal coil voltage
VDE
8 A at 250 VAC resistive, 100k cycles [1], [2], [3]
(1 Form A, 1 Form B and 1 Form C)
Ambient Temperature At nominal coil voltage
Material
Silver tin oxide [1] or silver nickel [2],
gold plated silver nickel [3] available
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Resistance
< 100 milliohms initially
Vibration
Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
Shock
10 g
COIL
Enclosure
P.B.T. polyester, UL94 V-O
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Power
Terminals
At Pickup Voltage
(typical)
120 mW (up to 24 VDC coil)
140 mW (48 VDC and 60 VDC coil)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Continuous
Dissipation
1.2 W at 20°C (68°F) ambient
Temperature Rise
Temperature
20°C (36°F) at nominal coil voltage
Max. 130°C (266°F)
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
8 grams
NOTES
Packing unit in pcs
20 per plastic tube / 1000 per carton box
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2004-07-28
5秒后页面跳转
MAX7219驱动8段数码管详解及数据手册关键信息
ATMEGA328P技术资料深入分析
AT24C02芯片手册管脚信息、参数分析、应用领域详解
AT24C256芯片手册参数分析、引脚说明、读写程序示例
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
