ATS636LSE

更新时间： 2024-02-23 13:48:19

品牌	Logo	应用领域
急速微 - ALLEGRO		开关
页数	文件大小	规格书
15页	814K
描述
Programmable Back Biased Hall-Effect Switch with TPOS Functionality

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ATS636LSE 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	包装说明：	SIP4,.3,50
Reach Compliance Code：	compliant	风险等级：	5.84
主体宽度：	7 mm	主体高度：	7 mm
主体长度或直径：	10 mm	JESD-609代码：	e3
最大测量范围（毫米）：	2.5 mm	最小测量范围（毫米）：	2.5 mm
安装特点：	THROUGH HOLE MOUNT	端子数量：	4
最大工作电流：	5.5 mA	最高工作温度：	150 °C
最低工作温度：	-40 °C	输出：	PASSIVE PULL-UP
输出极性：	INVERTING	输出范围：	30-90mA
输出类型：	ANALOG CURRENT	封装主体材料：	PLASTIC/EPOXY
封装等效代码：	SIP4,.3,50	封装形状/形式：	ROUND
电源：	12 V	响应时间：	1.2 µs
传感器/换能器类型：	PROXIMITY SENSOR,HALL EFFECT	子类别：	Other Sensors/Transducers
最大供电电压：	24 V	最小供电电压：	4.2 V
表面贴装：	NO	端子面层：	Matte Tin (Sn)
端接类型：	SOLDER	Base Number Matches：	1

ATS636LSE 数据手册

ATS635LSE and ATS636LSE

Programmable Back Biased Hall-Effect

Switch with TPOS Functionality

The ATS635LSE and ATS636LSE programmable, true power-on state

(TPOS), sensors are an optimized Hall-effect IC and magnet combination

that switch in response to magnetic signals created by ferrous targets in

gear-tooth sensing and proximity applications.

PACKAGE DIAGRAM

The devices are externally programmable.

A wide range of

programmability is available on the magnetic operate point (B_OP) while the

hysteresis remains fixed. This advanced feature allows for optimization of

the sensor switch point and can drastically reduce the effects of

mechanical placement tolerances found in production environments .

A proprietary dynamic offset cancellation technique, with an internal

high-frequency clock, reduces the residual offset voltage, which is normally

caused by device overmolding, temperature dependencies, and thermal

stress. Having the Hall element and amplifier in a single chip minimizes

many problems normally associated with low-level analog signals.

This sensor system is ideal for use in gathering speed or position

information using gear-tooth-based configurations, or for proximity sensing

with ferrous targets.

The ATS635LSE switches HIGH in the presence of a ferrous target or

tooth and switches LOW in the presence of a target valley, window, or

when the ferrous target is removed. The ATS636LSE has the opposite

polarity and switches LOW in the presence of a ferrous target or tooth and

switches HIGH in the presence of a target valley, window, or when the

ferrous target is removed.

These devices are available in lead (Pb) free versions, with 100%

matte tin leadframe plating.

Pin 1 = VCC

Pin 2 = VOUT

Pin 3 = No Connect

Pin 4 = GND

F_ꢀEATURES

Chopper Stabilization

ꢁ

Extremely low switch-point drift over temperature

On-chip Protection

Supply transient protection

Output short-circuit protection

Reverse-battery protection

ꢀ

ꢁ

ABSOLUTE MAXIMUM RATINGS

Supply Voltage, V_CC………………….…….. 28 V*

Reverse Supply Voltage, V_RCC…………… -18 V

Overvoltage Supply Current, I_CC…..……100 mA

Output Off Voltage, V_OUT…………………… 26.5V

Output Sink Current, I_OUT…...…………. 20 mA^†

Magnetic Flux Density, B…………… Unlimited

Package Power Dissipation, P_D….. See Graph

Operating Temperature Range, T_A

ꢀ

True Zero-Speed Operation

True Power-On State

Single-chip Sensing IC for High Reliability

Optimized Magnetic Circuit

Wide Operating Voltage Range

Internal Regulator

Suffix “L”………...……….. -40 °C to +150 °C

Junction Temperature, T_J……..…………..165 °C

Storage Temperature Range

T_S………………………… -65 °C to +170 °C

Use the following complete part numbers when ordering:

*Fault conditions that produce supply voltage transients will

be clamped by an internal Zener diode. These conditions

can be tolerated but should be avoided.

Part Number

Pb-Free

Output

(Tooth)

Packing*

^†Internal current limiting is intended to protect the device

from output short circuits, but is not intended for continuous

operation.

ATS635LSETN-T

ATS636LSETN-T

Yes

High

Low

13-in. reel, 450 pieces/reel

*Contact Allegro for additional packing options.

Allegro MicroSystems, Inc.

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

www.allegromicro.com

ATS635LSE-DS

12 3 4 5 6 7...15

中文翻译

下载PDF

与ATS636LSE相关器件

型号	品牌	获取价格	描述	数据表
ATS636LSE_12	ALLEGRO	获取价格	The ATS636LSE programmable, true power-on state (TPOS), device is optimized Hall-effect IC
ATS636LSETN	ALLEGRO	获取价格	Hall Effect Sensor, 2.5mm Min, 2.5mm Max, 30-90mA, Round, Through Hole Mount, LEAD FREE, 4
ATS636LSETN-T	ALLEGRO	获取价格	Programmable Back Biased Hall-Effect Switch with TPOS Functionality
ATS-638194300	MOLEX	获取价格	Hand Crimp Tool for Wire-to-Board Terminal, 28-30 AWG Wire for Loose Parts Only
ATS-638194400	MOLEX	获取价格	A full cycle ratcheting hand tool ensures complete crimps
ATS-638230100	MOLEX	获取价格	Hand Tool for 1.20mm Crimp Terminals, 30 AWG Wire for Reeled Product
ATS640A	CTS	获取价格	Standard HC-49/US thru-hole and HC-49/US-SM surface mount Packages
ATS640A-1EINS	CTS	获取价格	Parallel - 3Rd Overtone Quartz Crystal, 64MHz Nom, HC-49/US, 2 PIN
ATS640A-1INS	CTS	获取价格	Parallel - 3Rd Overtone Quartz Crystal, 64MHz Nom, HC-49/US, 2 PIN
ATS640A-E	CTS	获取价格	Standard HC-49/US thru-hole and HC-49/US-SM surface mount Packages

与ATS636LSE相关文章

L6234手册解读：引脚信息、电气参数
2024-07-01

1
解读BSP135H6327资料：电气参数及替换型号推荐
2024-07-01

1
FDG6302P资料解析：电气参数、产品特性
2024-07-01

3
SBAV99WT1G资料手册：参数信息、产品特性、替代型号推荐
2024-07-01

2

产品中心

服务支持

精选活动

关于我们

帮助中心

ATS636LSE

ATS636LSE 技术参数

ATS636LSE 数据手册

与ATS636LSE相关器件

与ATS636LSE相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATS636LSE

ATS636LSE 技术参数

ATS636LSE 数据手册

与ATS636LSE相关器件

与ATS636LSE相关文章

您还可以找

您在本页遇到什么问题？