Datasheet > ATR0808

ATR0808

更新时间： 2024-02-08 12:56:45

品牌	Logo	应用领域
爱特美尔 - ATMEL		振荡器驱动器射频
页数	文件大小	规格书
8页	237K
描述
Three Channel Laser Driver with RF Oscillator and Two Outputs

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ATR0808 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	SSOP	包装说明：	LSSOP, SSOP16,.25
针数：	16	Reach Compliance Code：	compliant
风险等级：	5.88	接口集成电路类型：	INTERFACE CIRCUIT
JESD-30 代码：	R-PDSO-G16	JESD-609代码：	e0
长度：	4.9 mm	功能数量：	1
端子数量：	16	最高工作温度：	70 °C
最低工作温度：		封装主体材料：	PLASTIC/EPOXY
封装代码：	LSSOP	封装等效代码：	SSOP16,.25
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：	NOT SPECIFIED	电源：	5 V
认证状态：	Not Qualified	座面最大高度：	1.7 mm
子类别：	Display Drivers	最大供电电压：	5.5 V
最小供电电压：	4.5 V	标称供电电压：	5 V
表面贴装：	YES	温度等级：	COMMERCIAL
端子面层：	Tin/Lead (Sn/Pb)	端子形式：	GULL WING
端子节距：	0.635 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	Base Number Matches：	1

ATR0808 数据手册

Features

• Current-controlled Output Current Source with 3 Input Channels

• Two Selectable Outputs for Grounded Laser Diodes

• Output Current per Write Channel: 350 mA

• Total Output Current: 500 mA

• 200 Ω Channel Input Resistance

• On-chip RF Oscillator

• Control of Two Different Swings by Use of Two External Resistors

• Oscillator Frequency Range from 200 MHz to 500 MHz

• Oscillator Swing: 100 mA

• Single 5 V Power Supply

• Common Enable/Disable Input

• TTL/CMOS Control Signals

• Small Pb-free QFN16 (4 mm × 4 mm) or SSO16 Package

Three Channel

Laser Driver

with RF

Oscillator and

Two Outputs

Applications

• DVD-ROM with CD-RW Capability

• DVD+RW with CD-RW Capability

• DVD-RW with CD-RW Capability

• Writable Optical Drives

ATR0808

Summary

Description

The ATR0808 is a laser diode driver for the operation of two different grounded laser

diodes for DVD-RW/DVD+RW (650 nm) and CD-RW (780 nm). It includes three chan-

nels for three different optical power levels which are controlled by a separate IC. The

read channel generates a continuous output level, whereas the channels 2 and 3 are

provided as write channels with very fast switching speeds. Write current pulses are

enabled when a low signal is applied to the NE pins. All channels are summed

together and switched to one of the two IOUTA or IOUTB outputs by the select input

SELA. Each write channel (channel 2 and 3) can contribute up to 350 mA to the total

output current, up to 500 mA. The read channel can contribute up to 150 mA. Total

gains of 100 (read channel), 250 (channel 2 and 3) are provided between each refer-

ence current input and the selected output. Although, the reference inputs are current

inputs, voltage control is possible by using external resistors. An on-chip RF oscillator

is provided to reduce laser mode hopping noise during read mode. Swing can be set

independently for the two selectable outputs with two different resistors. Oscillation is

enabled by a high signal at the ENOSC pin. Complete output current and oscillator

switch-off is achieved by a low signal at the ENABLE input.

Rev. 4724ES–DVD–01/04

12 3 4 5 6 7 8

下载PDF

与ATR0808相关器件

型号	品牌	描述	获取价格	数据表
ATR0808-PEG	ATMEL	Interface Circuit, CMOS, 4 X 4 MM, QFN-16	获取价格
ATR0808-PEQG	ATMEL	Three Channel Laser Driver with RF Oscillator and Two Outputs	获取价格
ATR0808-TCQ	ATMEL	Interface Circuit, PDSO16, MO-137AB, SSO-16	获取价格
ATR0808-TCQG	ATMEL	Three Channel Laser Driver with RF Oscillator and Two Outputs	获取价格
ATR0809	ATMEL	FOUR CHANNEL LASER DRIVER WITH RF OSCILLATOR AND TWO OUTPUTS	获取价格
ATR0809-PRQG	ATMEL	FOUR CHANNEL LASER DRIVER WITH RF OSCILLATOR AND TWO OUTPUTS	获取价格

与ATR0808相关文章

STM32H743技术深度剖析与应用案例探索
2024-05-30

15
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
2024-05-30

15
74HC14芯片资料介绍：性能特性分析、引脚介绍
2024-05-30

13
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
2024-05-30

10

产品中心

服务支持

精选活动

关于我们

帮助中心

ATR0808

ATR0808 技术参数

ATR0808 数据手册

与ATR0808相关器件

与ATR0808相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATR0808

ATR0808 技术参数

ATR0808 数据手册

与ATR0808相关器件

与ATR0808相关文章

您还可以找

您在本页遇到什么问题？