5秒后页面跳转
ATR0849-PFQG PDF预览

ATR0849-PFQG

更新时间: 2024-01-02 05:33:28
品牌 Logo 应用领域
爱特美尔 - ATMEL 驱动器
页数 文件大小 规格书
6页 164K
描述
4-Channel LVDS Laser Driver for Dual-layer Application

ATR0849-PFQG 技术参数

是否Rohs认证: 符合生命周期:Obsolete
零件包装代码:QFN包装说明:HVQCCN, LCC24,.16SQ,20
针数:24Reach Compliance Code:unknown
风险等级:5.81接口集成电路类型:INTERFACE CIRCUIT
JESD-30 代码:S-PQCC-N24JESD-609代码:e3
长度:4 mm功能数量:1
端子数量:24最高工作温度:70 °C
最低工作温度:封装主体材料:PLASTIC/EPOXY
封装代码:HVQCCN封装等效代码:LCC24,.16SQ,20
封装形状:SQUARE封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
电源:5 V认证状态:Not Qualified
座面最大高度:1 mm子类别:Display Drivers
最大供电电压:5.5 V最小供电电压:4.5 V
标称供电电压:5 V表面贴装:YES
温度等级:COMMERCIAL端子面层:Matte Tin (Sn) - annealed
端子形式:NO LEAD端子节距:0.5 mm
端子位置:QUAD宽度:4 mm
Base Number Matches:1

ATR0849-PFQG 数据手册

 浏览型号ATR0849-PFQG的Datasheet PDF文件第2页浏览型号ATR0849-PFQG的Datasheet PDF文件第3页浏览型号ATR0849-PFQG的Datasheet PDF文件第4页浏览型号ATR0849-PFQG的Datasheet PDF文件第5页浏览型号ATR0849-PFQG的Datasheet PDF文件第6页 
Features  
Current-controlled Output Current Source with 4 Input Channels  
LVDS Compatible Inputs at Channels 2, 3 and 4 with On-chip 100Termination  
Separate Read-channel Enable  
Two Selectable Outputs for Grounded Laser Diodes  
Output Current per Channel up to 350 mA  
Total Output Current up to 600 mA  
On-chip RF Oscillator  
Control of 2 Different Swings and Frequencies by use of 4 External Resistors  
Oscillator Frequency Range from 200 MHz to 500 MHz  
Maximum Oscillator Current Amplitude 100 mApp  
Single 5V Power Supply  
4-Channel LVDS  
Laser Driver for  
Dual-layer  
Small Pb-free QFN24, 4 mm × 4 mm Package  
Application  
Applications  
DVD+/-RW Dual Layer with CD-RW Capability  
Recordable Optical Drives  
ATR0849  
Summary  
1. Description  
The ATR0849 is a laser diode driver designed to operate two different grounded laser  
diodes for DVD-RW/DVD+RW (650 nm) and CD-RW (780 nm). The device includes  
four channels for four different optical power levels. The write channels (channels 2  
to 4) can be controlled by fast LVDS (Low Voltage Differential Signaling).  
The read channel generates a continuous output current, whereas channels 2 to 4 are  
designed as write channels with very fast switching speed. All channels are summed  
together and routed to one of the two outputs, IOUTA or IOUTB, controlled by the  
select input, SELA. Each write channel (channel 2 to 4) can contribute up to 350 mA  
to the total output current of up to 600 mA. The read channel can contribute up to  
150 mA. Total gains of 100 (read channel) and 250 (channels 2, 3 and 4), are pro-  
vided between each reference current input and the selected output. Although the  
reference inputs are current inputs, voltage control is possible by using external resis-  
tors. An on-chip RF oscillator is available to reduce laser-mode hopping noise during  
read mode. The oscillator current amplitude can be set independently for the two  
selectable outputs with two different resistors. Oscillation is enabled by a high signal  
at the ENOSC pin. Complete shutdown of the output currents is achieved by a low sig-  
nal at the ENABLE input.  
In read mode, the reference currents (I2, I3, I4) should be switched off to reduce  
power consumption.  
In case of uncertain (balanced) enable signals, a built-in fail-safe circuit will reduce the  
laser diode output current to a safe value.  
Rev. 4851BS–DVD–06/05  
Note: This is a summary document. A complete dorcument  
is available under NDA. For more information, please con-  
tact your local Atmel sales office.  

与ATR0849-PFQG相关器件

型号 品牌 描述 获取价格 数据表
ATR0874 ATMEL 10-channel High Speed Photo Detector IC for DVD/CD

获取价格

ATR0874-PZQW ATMEL 10-channel High Speed Photo Detector IC for DVD/CD

获取价格

ATR0881 ATMEL 3-output Laser Driver with 5 Channels and Serial Interface

获取价格

ATR0881-PTQW ATMEL 3-output Laser Driver with 5 Channels and Serial Interface

获取价格

ATR0885 ATMEL 3-output Laser Driver for HD-DVD/ Blu-ray/DVD/ CD-ROM

获取价格

ATR0885-PFQW ATMEL 3-output Laser Driver for HD-DVD/ Blu-ray/DVD/ CD-ROM

获取价格