ATA6565
connection between them (with the exception of the
GND pins, GND1 and GND2), so they work completely
independent of each other.
1.0
FUNCTIONAL DESCRIPTION
The ATA6565 is a stand-alone, dual high-speed
CAN transceiver, compliant with the ISO 11898-2,
ISO 11898-5, ISO 11898-2:2016, and SAE J2962-2
standards. Each of the two transceivers provides a very
low current consumption in Standby mode and
wake-up capability via the CAN bus.
1.1
Operating Modes
Each of the transceivers supports three operating
modes: Unpowered, Standby, and Normal. Addition-
ally, there is the internal Silent mode, which is not exter-
nally accessible. This mode is a Receive Only mode,
which means the CAN drivers are deactivated and only
data from the bus can be received.
The functions described in the following text apply to
each of the two identical high-speed CAN transceivers
integrated in the ATA6565. Therefore, if for example,
the CANH pin is stated, this applies to each of the two
transceivers, meaning CANH1 and CANH2. The two
transceivers are identical, and there is no internal
The operating modes can be selected via the STBY pins
(STBY1 and STBY2). See Figure 1-1 and Table 1-1 for
a description of the operating modes.
FIGURE 1-1:
OPERATING MODES
VCC < V
VCC < V
uvd(V&&)
uvd(VCC)
Unpowered
Mode
VCC < V
VCC > V
uvd
ꢂ9&&ꢃ
uvdꢂ9&&ꢃ
STBY = 1
STBY = 1
Standby
Mode
STBY = 0 and
TXD = 0
STBY = 0 and
TXD = 1 and
Error = 0
Error = 0 and
TXD = 1
*
Silent
Mode
Normal
Mode
Error = 1
*
Silent mode is externally not accessible. In this mode, the transceiver can only receive data from the bus,
but the transmitter is disabled.
TABLE 1-1:
Mode
OPERATING MODES
Inputs
Outputs
STBY
Pin TXD
CAN Driver
Pin RXD
Unpowered
Standby
Normal
X(1)
High
Low
Low
X(1)
X(1)
Recessive
Recessive
Dominant
Recessive
Recessive
Active(2)
Low
Low
High
High
Note 1: Irrelevant.
2: Reflects the bus only for wake-up.
2017-2020 Microchip Technology Inc.
DS20005782E-page 3