5秒后页面跳转
AT93C86A-10SQ-2.7-T PDF预览

AT93C86A-10SQ-2.7-T

更新时间: 2024-11-24 20:58:27
品牌 Logo 应用领域
美国微芯 - MICROCHIP 可编程只读存储器电动程控只读存储器电可擦编程只读存储器
页数 文件大小 规格书
17页 802K
描述
EEPROM

AT93C86A-10SQ-2.7-T 技术参数

是否Rohs认证: 符合生命周期:Active
包装说明:,Reach Compliance Code:compliant
Factory Lead Time:8 weeks风险等级:5.65
峰值回流温度(摄氏度):NOT SPECIFIED串行总线类型:MICROWIRE
处于峰值回流温度下的最长时间:NOT SPECIFIEDBase Number Matches:1

AT93C86A-10SQ-2.7-T 数据手册

 浏览型号AT93C86A-10SQ-2.7-T的Datasheet PDF文件第2页浏览型号AT93C86A-10SQ-2.7-T的Datasheet PDF文件第3页浏览型号AT93C86A-10SQ-2.7-T的Datasheet PDF文件第4页浏览型号AT93C86A-10SQ-2.7-T的Datasheet PDF文件第5页浏览型号AT93C86A-10SQ-2.7-T的Datasheet PDF文件第6页浏览型号AT93C86A-10SQ-2.7-T的Datasheet PDF文件第7页 
AT93C86A  
3-wire Automotive Temperature Serial EEPROM  
16K (2,048 x 8 or 1,024 x 16)  
DATASHEET  
Features  
Medium-voltage and Standard-voltage Operation  
2.7 (VCC = 2.7V to 5.5V)  
̶
Automotive Temperature Range -40C to +125C  
User Selectable Internal Organization  
̶
16K: 2,048 x 8 or 1,024 x 16  
3-wire Serial Interface  
Sequential Read Operation  
Schmitt Trigger, Filtered Inputs for Noise Suppression  
2MHz Clock Rate (5V) Compatibility  
Self-timed Write Cycle (10ms max)  
High Reliability  
̶
̶
Endurance: 1,000,000 Write Cycles  
Data Retention: 100 Years  
Lead-Free/Halogen-Free Devices Available  
8-lead JEDEC SOIC and 8-lead TSSOP Packages  
Description  
The AT93C86A provides 16,384 bits of Serial Electrically Erasable Programmable  
Read-Only Memory (EEPROM), organized as 1,024 words of 16 bits each when  
the ORG pin is connected to VCC and 2,048 words of 8 bits each when it is tied to  
ground. The device is optimized for use in many automotive applications where  
low-power and low-voltage operations are essential. The AT93C86A is available  
in space saving 8-lead JEDEC SOIC and 8-lead TSSOP packages.  
The AT93C86A is enabled through the Chip Select pin (CS), and accessed via a  
3-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift  
Clock (SK). Upon receiving a READ instruction at DI, the address is decoded and  
the data is clocked out serially on the data output pin DO. The write cycle is  
completely self-timed and no separate erase cycle is required before Write. The  
write cycle is only enabled when the part is in the Erase/Write Enable state. When  
CS is brought “high” following the initiation of a write cycle, the DO pin outputs the  
Ready/Busy status of the part. The AT93C86A is available in a 2.7V to 5.5V  
version.  
Atmel-5096H-SEEPROM-AT93C86A-Automotive-Datasheet_012017  

与AT93C86A-10SQ-2.7-T相关器件

型号 品牌 获取价格 描述 数据表
AT93C86A-10SU-1.8 ATMEL

获取价格

Three-wire Serial EEPROM
AT93C86A-10SU-1.8 MICROCHIP

获取价格

IC EEPROM 16KBIT 2MHZ 8SOIC
AT93C86A-10SU-1.8-T MICROCHIP

获取价格

EEPROM
AT93C86A-10SU-2.7 ATMEL

获取价格

Three-wire Serial EEPROM
AT93C86A-10SU-2.7 MICROCHIP

获取价格

IC EEPROM 16KBIT 2MHZ 8SOIC
AT93C86A-10SU-2.7-T MICROCHIP

获取价格

EEPROM
AT93C86A-10TQ-2.7 ATMEL

获取价格

Three-wire Automotive Temperature Serial EEPROM 16K (2048 x 8 or 1024 x 16)
AT93C86A-10TU-1.8 ATMEL

获取价格

Three-wire Serial EEPROM
AT93C86A-10TU-1.8 MICROCHIP

获取价格

IC EEPROM 16KBIT 2MHZ 8TSSOP
AT93C86A-10TU-1.8-T MICROCHIP

获取价格

EEPROM