5秒后页面跳转
AT88SC6416CRF-WA1 PDF预览

AT88SC6416CRF-WA1

更新时间: 2024-01-10 15:05:33
品牌 Logo 应用领域
爱特美尔 - ATMEL 存储电信集成电路可编程只读存储器电动程控只读存储器电可擦编程只读存储器
页数 文件大小 规格书
9页 255K
描述
13.56 MHz CryptoRF® EEPROM Memory 64 Kbits

AT88SC6416CRF-WA1 技术参数

生命周期:Transferred包装说明:DIE,
Reach Compliance Code:compliantHTS代码:8542.39.00.01
风险等级:5.58JESD-30 代码:R-XUUC-N
功能数量:1最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:UNSPECIFIED
封装代码:DIE封装形状:RECTANGULAR
封装形式:UNCASED CHIP认证状态:Not Qualified
表面贴装:YES技术:CMOS
电信集成电路类型:TELECOM CIRCUIT温度等级:INDUSTRIAL
端子形式:NO LEAD端子位置:UPPER
Base Number Matches:1

AT88SC6416CRF-WA1 数据手册

 浏览型号AT88SC6416CRF-WA1的Datasheet PDF文件第1页浏览型号AT88SC6416CRF-WA1的Datasheet PDF文件第2页浏览型号AT88SC6416CRF-WA1的Datasheet PDF文件第4页浏览型号AT88SC6416CRF-WA1的Datasheet PDF文件第5页浏览型号AT88SC6416CRF-WA1的Datasheet PDF文件第6页浏览型号AT88SC6416CRF-WA1的Datasheet PDF文件第7页 
AT88SC6416CRF  
4. Communications  
All personalization and communication with this device is performed through the RF interface.  
The IC includes an integrated tuning capacitor, enabling it to operate with only the addition of a  
single external coil antenna.  
The RF communications interface is fully compliant with the electrical signaling and RF power  
specifications in ISO/IEC 14443-2:2001 for Type B only. Anticollision operation and frame for-  
matting are compliant with ISO/IEC 14443-3:2001 for Type B only.  
ISO/IEC 14443 nomenclature is used in this specification where applicable. The following abbre-  
viations are utilized throughout this document. Additional terms are defined in the section in  
which they are used.  
• PCD – Proximity Coupling Device: the reader/writer and antenna  
• PICC – Proximity Integrated Circuit Card: the tag/card containing the IC and antenna  
• RFU – Reserved for Future Use: any feature, memory location, or bit that is held as reserved  
for future use  
• $ xx – Hexadecimal Number: denotes a hex number “xx” (Most Significant Bit on left)  
4.1  
Anticollision Protocol  
When the PICC enters the 13.56 MHz RF field of the host reader (PCD), it performs a power on  
reset (POR) function and waits silently for a valid Type B polling command. The CryptoRF PICC  
processes the antitearing registers as part of the POR process.  
The PCD initiates the anticollision process by issuing an REQB or WUPB command. The WUPB  
command activates any card (PICC) in the field with a matching AFI code. The REQB command  
performs the same function but does not affect a PICC in the Halt state. The CryptoRF com-  
mand set is available only after the anticollision process has been completed.  
4.2  
CRC Error Detection  
A two-byte CRC_B is required in each frame transmitted by the PICC or PCD to permit transmis-  
sion error detection. The CRC_B is calculated on all of the command and data bytes in the  
frame. The SOF, EOF, start bits, stop bits, and EGT are not included in the CRC_B calculation.  
The two-byte CRC_B follows the data bytes in the frame.  
Figure 4-1. Location of the Two CRC_B Bytes within a Frame  
SOF  
K data bytes  
CRC1  
CRC2  
EOF  
4.3  
Type A Tolerance  
The RF Interface is designed for use in multiprotocol applications. It will not latch or lock up if  
exposed to Type A signals and will not respond to them. The PICC may reset in the presence of  
Type A field modulation but is not damaged by exposure to Type A signals.  
3
5006DS–CRRF–04/09  

与AT88SC6416CRF-WA1相关器件

型号 品牌 描述 获取价格 数据表
AT88SC6416C-SI ATMEL CryptoMemory 64 Kbit

获取价格

AT88SC6416C-SU ATMEL CryptoMemory 64 Kbit

获取价格

AT88SC6416C-SU-T ATMEL Memory Circuit, 64KX1, CMOS, PDSO8, 0.150 INCH, GREEN, PLASTIC, SOIC-8

获取价格

AT88SC6416C-WI ATMEL CryptoMemory 64 Kbit

获取价格

AT88SC6416C-Y4U ATMEL EEPROM, 64KX1, Serial, CMOS, 6 X 4.90 MM, LEAD FREE AND HALOGEN FREE, SAP-8

获取价格

AT88SC8100 ETC ASIC

获取价格