Features
• 1K X 1 Serial EEPROM with Security Logic
• Two Application Zones
• Stores and Validates Security Codes
• Maximum of Eight Incorrect Security Code Attempts
• Provides Transport Code Security
• Low Voltage Operation: 2.7V to 5.5V
• Manufactured using Low Power CMOS Technology
• Supports ISO/IEC 7816-3 Synchronous Protocol
• VPP Internally Generated
• 2 µs Read Access Time; 2 ms Write Cycle Time
• Temperature Range from -40°C to 85°C
• ESD Protection 4,000V Minimum.
• High Reliability:
1K EEPROM -
Security Logic
with Two
100,000 Program/Erase Cycles Guaranteed
Data Retention of 10 years
Application
Zones
Description
The AT88SC102 device is a low-cost, synchronous, secure memory integrated circuit,
designed for use in prepaid and loyalty smart card applications. The AT88SC102
provides 1024 bits of serial Electrically Erasable and Programmable Read Only
Memory (EEPROM) within two Application Zones, plus 64 bits in a code protected
zone. Additional EEPROM memory and security logic provide security for smart card
applications. Space is provided in the EEPROM memory for manufacturing records for
both the smart card manufacturer and card issuer. After personalization, these
records, and the state of the bit which enables the Erase Counter function, are locked
and protected from modification for the lifetime of the product.
AT88SC102
Card Module Contacts
ISO Card Contact Descriptions
ISO
Contact
VDD C1 C5 VSS
Pad Name
VCC
RST
Description
RST C2 C6 NC
CLK C3 C7 I/O
FUS C4 C8 PGM
C1
Operating Voltage
Address Reset
Clock and Address Control
Fuse
C2
C3
CLK
C4
FUS
C5
GND
NC
Ground
C6
No Connect
C7
I/O
Bidirectional Data
Programming Control
C8
PGM
Rev. 1419B–11/99
1