Atmel AT88SC0204CA
Atmel CryptoMemory
SUMMARY DATASHEET
Features
• One of a family of devices with user memories from 1Kbit to 8Kbit
• 2Kbit (256-byte) EEPROM user memory
•
•
•
•
Four 512-bit (64-byte) zones
Self-timed write cycle
Single byte or 16-byte page write mode
Programmable access rights for each zone
• 2Kbit configuration zone
•
•
37-byte OTP (One-time Programmable) area for user-defined codes
160-byte area for user-defined keys and passwords
• High security features
•
•
•
•
•
•
•
64-bit mutual authentication protocol (under license of ELVA)
Cryptographic Message Authentication Codes (MAC)
Stream encryption
Four key sets for authentication and encryption
Eight sets of two 24-bit passwords
Anti-tearing function
Voltage and frequency monitors
• Smart card features
•
•
•
•
•
•
ISO 7816 Class B (3V) operation
ISO 7816-3 asynchronous T=0 protocol (Gemplus® Patent) *
Multiple zones, key sets and passwords for multi-application use
Synchronous two-wire serial interface for faster device initialization *
Programmable 8-byte answer-to-reset register
ISO 7816-2 compliant modules
• Embedded application features
•
•
•
•
•
•
Low voltage supply: 2.7V – 3.6V
Secure nonvolatile storage for sensitive system or user information
Two-wire serial interface (TWI, 5V compatible)
1.0MHz compatibility for fast operation
Standard 8-lead plastic packages, green compliant (exceeds RoHS)
Same pin configuration as Atmel® AT24CXXX Serial EEPROM in SOIC and
PDIP packages
• High reliability
•
•
•
Endurance: 100,000 cycles
Data retention: 10 years
This is a summary document.
The complete document is
available on the Atmel website
at www.atmel.com.
ESD protection: 2,000V min
* Note: Modules available with either T = 0 / 2-wire modes or 2-wire mode only
5202FS−CRYPTO−12/11