AT25080B and AT25160B
SPI Serial EEPROMs
8K (1,024 x 8) and 16K (2,048 x 8)
DATASHEET
Features
Serial Peripheral Interface (SPI) Compatible
Supports SPI Modes 0 (0,0) and 3 (1,1)
̶
Datasheet Describes Mode 0 Operation
Low-voltage and Standard-voltage Operation
1.8 (VCC = 1.8V to 5.5V)
̶
20MHz Clock Rate (5V)
32-byte Page Mode
Block Write Protection
̶
Protect 1/4, 1/2, or Entire Array
Write Protect (WP) Pin and Write Disable Instructions for Both Hardware and
Software Data Protection
Self-timed Write Cycle (5ms max)
High Reliability
̶
̶
Endurance: 1,000,000 Write Cycles
Data Retention: 100 Years
Green (Pb/Halide-free/RoHS Compliant) Packaging Options
Die Sales: Wafer Form, Tape and Reel, and Bumped Wafers
Description
The Atmel® AT25080B/160B provides 8,192/16,384 bits of Serial Electrically-
Erasable Programmable Read-Only Memory (EEPROM) organized as
1,024/2,048 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power and low-voltage
operation are essential. The AT25080B/160B is available in space-saving 8-lead
JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, 8-pad XDFN, 8-ball VFBGA, and
8-ball WLCSP packages.
The AT25080B/160B is enabled through the Chip Select pin (CS) and accessed
via a 3-wire interface consisting of Serial Data Input (SI), Serial Data Output (SO),
and Serial Clock (SCK). All programming cycles are completely self-timed, and no
separate erase cycle is required before write.
Block Write protection is enabled by programming the status register with one of
four blocks of write protection. Separate program enable and program disable
instructions are provided for additional data protection. Hardware data protection
is provided via the WP pin to protect against inadvertent write attempts to the
status register. The HOLD pin may be used to suspend any serial communication
without resetting the serial sequence.
Atmel-5228G-SEEPROM-AT25080B-160B-Datasheet_012015