Features
• Serial Peripheral Interface (SPI) Compatible
• Supports SPI Modes 0 (0,0) and 3 (1,1)
– Datasheet Describes Mode 0 Operation
• Low-voltage and Standard-voltage Operation
– 2.7 (VCC = 2.7V to 5.5V)
– 1.8 (VCC = 1.8V to 5.5V)
• 20 MHz Clock Rate (5V)
• 32-byte Page Mode
• Block Write Protection
– Protect 1/4, 1/2, or Entire Array
• Write Protect (WP) Pin and Write Disable Instructions for Both Hardware and Software
Data Protection
• Self-timed Write Cycle (5 ms max)
• High Reliability
SPI Serial
EEPROMs
8K (1024 x 8)
16K (2048 x 8)
32K (4096 x 8)
64K (8192 x 8)
– Endurance: One Million Write Cycles
– Data Retention: 100 Years
• Automotive Grade, Extended Temperature, and Lead-free/Halogen-free
Devices Available
• 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, and 8-lead TSSOP Packages
• Die Sales: Wafer Form, Waffle Pack, and Bumped Wafers
Description
The AT25080A/160A/320A/640A provides 8192/16384/32768/65536 bits of serial
electrically-erasable programmable read-only memory (EEPROM) organized as
1024/2048/4096/8192 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power and low-voltage operation
are essential. The AT25080A/160A/320A/640A is available in space-saving 8-lead
PDIP, 8-lead JEDEC SOIC, 8-lead MAP, and 8-lead TSSOP packages.
AT25080A
AT25160A
AT25320A
AT25640A
The AT25080A/160A/320A/640A is enabled through the Chip Select pin (CS) and
accessed via a three-wire interface consisting of Serial Data Input (SI), Serial Data
Output (SO), and Serial Clock (SCK). All programming cycles are completely self-
timed, and no separate erase cycle is required before write.
Table 1. Pin Configuration
Pin Name
CS
Function
Chip Select
8-lead SOIC
8-lead PDIP
SCK
SI
Serial Data Clock
Serial Data Input
Serial Data Output
Ground
CS
SO
1
2
3
4
8
7
6
5
VCC
HOLD
SCK
SI
CS
SO
1
2
3
4
8
7
6
5
VCC
HOLD
SCK
SI
WP
WP
SO
GND
GND
GND
VCC
WP
8-lead MAP
Power Supply
Write Protect
8-lead TSSOP
VCC
8
7
6
5
1
2
3
4
CS
CS
SO
1
2
3
4
8
7
6
5
VCC
HOLD
SCK
SI
HOLD
SCK
SI
SO
HOLD
Suspends Serial
Input
WP
GND
WP
GND
Bottom View
NC
DC
No Connect
Don’t Connect
3347I–SEEPR–1/05
1