Features
• Low-voltage and Standard-voltage Operation, VCC = 2.7V–5.5V
• Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K),
1024 x 8 (8K), or 2048 x 8 (16K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 400 kHz Compatibility
• 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms max)
• High Reliability
Two-wire Serial
EEPROM Smart
Card Modules
1K (128 x 8)
– Endurance: One Million Write Cycles
– Data Retention: 100 Years
– ESD Protection: >3000V
Description
The AT24C01A/02SC/04SC/08SC/16SC provide 1024/2048/4096/8192/16384 bits of
serial, electrically-erasable, and programmable read-only memory (EEPROM) orga-
nized as 128/256/512/1024/2048 words of 8 bits each. The devices are optimized for
use in smart card applications where low-power and low-voltage operation may be
essential. The devices are available in several standard ISO 7816 smart card modules
(see Ordering Information, pages 12–13). All devices are functionally equivalent to
Atmel serial EEPROM products offered in standard IC packages (PDIP, SOIC, TSSOP,
MAP), with the exception of the slave address and write protect functions, which are
not required for smart card applications.
2K (256 x 8)
4K (512 x 8)
8K (1024 x 8)
16K (2048 x 8)
Table 1. Pin Configuration
AT24C01ASC
AT24C02SC
AT24C04SC
AT24C08SC
AT24C16SC
Pad Name
VCC
Description
ISO Module Contact
Power Supply Voltage
Ground
C1
GND
SCL
C5
Serial Clock Input
Serial Data Input/Output
No Connect
C3
C7
SDA
NC
C2, C4, C6, C8
Figure 1. Card Module Contact
VCC
NC
1610B–SEEPR–04/04
1