AT-220 11/15/96 1:49 PM Page 1
(Black plate)
Digital Attenuator, 30 dB, 4-Bit
DC - 2 GHz
AT-220
V3.00
Features
SO-16
●
Attenuation 2-dB Steps to 30 dB
Pin #16
●
High Accuracy +/-3%
.2284-.2440
.1497-.1574
(3.80-4.00)
-B-
●
Temperature Stability +/-0.15 dB from -40°C to +85°C
Low Intermodulation Product: +50 dBm IP3
(5.80-6.20)
.010(0.25) M B M
●
Pin #1
●
●
●
Orientation
Mark
Low DC Power Consumption: 50 mW
Low Cost SOIC 16 Plastic Package
Tape and Reel Packaging Available1
.0532-.0688
(1.35-1.75)
.0099-.0196 x 45°
Chamfer
0.3859-0.3937
(9.80-10.00)
-A-
(0.25-0.50)
0°-8°
-C-
.004 (0.10)
.0075-.0098
(0.19-0.25)
Description
.0040-.0098
(0.10-0.25)
0.050(1.27) BSC.
.013-.020 TYP
(0.33-0.51)
.010(0.25) M C A M B S
.016-.050
M/A-COM’s AT-220 is a 4-bit, 2-dB step GaAs MMIC
digital attenuator in a low cost SOIC 16-lead surface
mount plastic package. The AT-220 is ideally suited for
use where high accuracy, fast switching, very low power
consumption and low intermodulation products are
required. Typical applications include radio and cellular
equipment, wireless LANs, GPS equipment and other
Gain/Level Control circuits.
(0.40-1.27)
16-Lead SOP outline dimensions
Narrow body .150
(All dimensions per JEDEC No. MS-012-AC, Issue C)
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ± 0.25)
.xx = ± 0.02 (.x = ±0.5)
Ordering Information
The AT-220 is fabricated with a monolithic GaAs MMIC
using a mature 1-micron process. The process features
full chip passivation for increased performance and
reliability.
Part Number
AT-220 PIN
AT-220TR
Package
SOIC 16-Lead Plastic Package
Forward Tape & Reel
Reverse Tape & Reel
AT-220RTR
Electrical Specifications, T = 25°C
A
Parameter
Test Conditions2
Unit
dB
dB
dB
dB
Min.
Typ.
1.2
1.5
1.6
1.8
Max
1.4
1.7
1.8
2.1
Reference Insertion Loss
DC – 0.1 GHz
DC – 0.1 GHz
DC – 1.0 GHz
DC – 2.0 GHz
Attenuation Accuracy3
VSWR
DC – 1.0 GHz
DC – 2.0 GHz
±(0.15 dB + 3% of Attenuation Setting in dB) dB
±(0.30 dB + 3% of Attenuation Setting in dB) dB
1.2:1
Trise, Tfall
Ton, Toff
Transients
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
nS
nS
mV
12
18
25
1 dB
Compression
Input Power
Input Power
0.05 GHz
0.5 – 2.0 GHz
dBm
dBm
20
28
Measured Relative
to Input Power
0.05 GHz
0.5 – 2.0 GHz
dBm
dBm
45
68
IP2
IP3
(For two-tone Input Power Up to +5 dBm)
Measured Relative
to Input Power
(For two-tone Input Power Up to +5 dBm)
0.05 GHz
0.5 – 2.0 GHz
dBm
dBm
40
50
1. Refer to “Tape and Reel Packaging” Section, or contact factory.
2. All measurements at 1 GHz in a 50Ω system, unless otherwise specified.
3. Attenuation accuracy specifications apply with negative bias control and low inductance grounding.
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
1
North America: Tel. (800) 366-2266
Fax (800) 618-8883
■
Asia/Pacific: Tel. +81 3 3263 8761
Fax +81 3 3263 8769
■
Europe: Tel. +44 (1344) 869 595
Fax +44 (1344) 300 020