‡
AR0132AT: 1/3-Inch CMOS Digital Image Sensor
Features
1/3-Inch CMOS Digital Image Sensor
AR0132AT Datasheet, Rev. 9
For the latest data sheet, please visit www.onsemi.com
Table 1:
Key Parameters
Features
Parameter
Typical Value
• Superior low-light performance
• HD video (720p60)
Optical format
Active pixels
1/3-inch (6 mm)
1280 x 960 = 1.2 Mp
3.75 m
RGB Bayer, or monochrome
Electronic rolling shutter
6 – 50 MHz
74.25 MHz
• Linear or high dynamic range capture
• Video/Single Frame modes
• On-chip AE and statistics engine
• Parallel and serial output
• Auto black level calibration
• Context switching
Pixel size
Color filter array
Shutter type
Input clock range
Output clock maximum
• Temperature Sensor
Output
Serial
HiSPi 12-, 14-, or 20-bit
12-bit
Parallel
Full resolution
720p
Applications
• Automotive imaging
Frame
rate
45 fps
60 fps
• Video surveillance
• 720p60 video applications
• High dynamic range imaging
Responsivity
5.48 V/lux-sec
43.9 dB
SNRMAX
Maximum dynamic range
>115 dB
Supply
voltage
I/O
1.8 or 2.8 V*
1.8 V
Digital
Analog
HiSPi
General Description
2.8 V
ON Semiconductor's AR0132AT is a 1/3-inch CMOS
digital image sensor with an active-pixel array of
1280H x 960V. It captures images in either linear or
high dynamic range modes, with a rolling-shutter
readout. It includes sophisticated camera functions
such as auto exposure control, windowing, and both
video and single frame modes. It is designed for both
low light and high dynamic range scene performance.
It is programmable through a simple two-wire serial
interface. The AR0132AT produces extraordinarily
clear, sharp digital pictures, and its ability to capture
both continuous video and single frames makes it the
perfect choice for a wide range of applications, includ-
ing surveillance and HD video.
0.4V or 1.8V
Power consumption
(typical)
270 mW (1280 x 720 60 fps
Parallel output Linear Mode)
460 mW (1280x720 60 fps
Parallel output HDR Mode)
–40°C to + 105° C (ambient)
Operating temperature
Package options
–40°C to + 120° C (junction)
9x9 mm iBGA
Bare die
Note: *1.8V VDD_IO is recommended for better row noise
performance
AR0132AT/D Rev. 9, 2/16 EN
1
©Semiconductor Components Industries, LLC 2016,