UL CSA
Pending Pending
POWER PhotoMOS RELAYS PhotoMOS
(High capacity type)
RELAYS
FEATURES
1. High capacity type power photoMOS
5. Low-level off state leakage current
In contrast to the SSR with an off state
leakage current of several milliamps, the
PhotoMOS relay features a very small off
state leakage current of only 10mA even
at the rated load voltage.
relay.
Can switch a wide range of currents and
voltages. Can control various types of
loads, from very small loads to a maxi-
mum 6A AC/DC current for sequencers,
motors, and lamps.
Max. 9.0
.354
Max. 43.0
1.693
Max. 32.0
1.260
6. Controls low-level analog signals
The triac, photocoupler, or SSR cannot be
used to control signals of less than sever-
al hundred mV. The high capacity type
power PhotoMOS relay feature extremely
low closed-circuit offset voltage to enable
control of low-level analog signals without
distortion.
2. Low ON resistance and high sensi-
tivity.
Low ON resistance of less than 50 mW on
a par with mechanical relays (AQZ262).
High sensitivity LED operate current of 3
mA (at 25°C 77°F ).
mm inch
3. AC/DC dual use
Bi-directional control is possible. There is
no need to differentiate depending on the
load as was necessary with the conven-
tional SSR.
TYPICAL APPLICATIONS
• Mercury relay replacement
• Railroad, traffic signals
• Compact motors, lamps, heaters
• OA equipment
4. 4-pin SIL type.
4-pin SIL type of (L) 43.0 mm × (W) 9.0
mm × (H) 32.0 mm (L) 1.693 inch× (W)
.354 inch× (H) 1.260 inch.
• Measurement instruments
TYPES
AC/DC type
Output rating*
Packing quantity
Part No.
Load voltage
Load current
6.0 A
Inner carton
20 pcs
Outer carton
200 pcs
60 V
AQZ262
AQZ264
400 V
1.0 A
* Indicate the peak AC and DC values.
RATING
1) Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
Symbol
IF
AQZ262
AQZ264
Remarks
LED forward current
LED reverse voltage
Peak forward current
Power dissipation
50 mA
3 V
VR
Input
IFP
1 A
f = 100Hz, Duty factor = 0.1%
100 ms (1shot), VL = DC
Pin
75 mA
Load voltage (Peak AC)
Continuous load current (Peak AC)
Peak load current
VL
60 V
6.0 A
10.0 A
400 V
1.0 A
3.0 A
IL
Output
Ipeak
Pout
PT
Power dissipation
3.0 W
3.0 W
Total power dissipation
I/O isolation voltage
Viso
Topr
Tstg
1,500 V AC
Operating
Storage
–40°C to +85°C –40°F to 185°F
–40°C to +100°C –40°F to 212°F
Non-condensing at low temperatures
Temperature limits
626