CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Surface Mount
NPCAPTM-PXSSeries
Super low ESR, high ripple current capability
・
・
・
・
・
PXS
Longer life (20,000 hours at 105
)
℃
Rated voltage range : 4 to 16Vdc, Capacitance range : 22 to 560μF
Longer life
Case size : 5×5.8L to 8×6.7L
φ
φ
Suitable for DC-DC converters, voltage regulators and decoupling applications
for computer motherboards etc.
PXE/PXA
P2-26 P2-28
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
RoHS2 Compliant
Halogen Free
・
・
・
SPECIFICATIONS
◆
Items
Characteristics
Category
-55 to +105
4 to 16Vdc
℃
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
20% (M)
±
(at 20 , 120Hz)
℃
Rated voltage 1.15
(at 105
)
℃
×
Leakage Current
I=0.2CV
Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (Vdc
)
(at 20 after 2 minutes)
℃
Dissipation Factor
0.12 max.
(at 20 , 120Hz)
(tan
)
℃
δ
Low Temperature
Z(-25 )/Z(+20
)
)
1.15
1.25
℃
℃ ≦
Characteristics
Z(-55 )/Z(+20
℃
℃ ≦
(at 100kHz)
(Max. Impedance Ratio)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 20,000 hours
℃
at 105 .
℃
Appearance
Capacitance change
No significant damage
20% of the initial value
≦±
D.F. (tan
ESR
Leakage current
)
150% of the initial specified value
150% of the initial specified value
The initial specified value
δ
≦
≦
≦
Bias Humidity
Surge Voltage
Failure Rate
The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to the DC rated voltage at
℃
60 , 90 to 95% RH for 1,000 hours.
℃
Appearance
Capacitance change
No significant damage
20% of the initial value
≦±
D.F. (tan
ESR
Leakage current
)
150% of the initial specified value
150% of the initial specified value
The initial specified value
δ
≦
≦
≦
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds
℃
through a protective resistor(R=1k )and discharge for 5 minutes 30 seconds.
Ω
Appearance
Capacitance change
No significant damage
20% of the initial value
≦±
D.F. (tan
ESR
Leakage current
)
150% of the initial specified value
150% of the initial specified value
The initial specified value
δ
≦
≦
≦
0.5% per 1,000 hours maximum (Confidence level 60% at 105
)
℃
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
DIMENSIONS [mm]º
◆
MARKING
◆
EX) 6.3V390µF
●Terminal Code : A
W
S
69A
390
Size Code
E61
F61
L
A
B
C
W
P
φD
6.3V
5.0 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4
6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
8.0 6.7 8.3 8.3 9.0 0.7 to 1.1 3.1
H70
0.3max.
A±0.2
L±0.3
PART NUMBERING SYSTEM
◆
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
A P X S
A R A
M
G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470, 150µF:151)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 10V:100)
Series code
Category
Please refer to "Product code guide (conductive polymer type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001R
2-22