APX809/810
3-PIN MICROPROCESSOR RESET CIRCUITS
General Description
Features
The APX809/810 are used for microprocessor (µP) supervisory
circuits to monitor the power supplies in µP and digital systems.
They provide excellent circuit reliability and low cost by
eliminating external components and adjustments when used
with +5V, +3.3V, +3.0V powered circuits.
•
Precision Monitoring of +2.5V, +3V, +3.3V, and +5V
Power-Supply Voltages
Fully Specified Over Temperature
Available in three Output Configurations
•
•
•
Push-PullRESET Active Low (APX809)
These circuits perform a single function: they assert a reset
signal whenever the VCC supply voltage declines below a preset
threshold, keeping it asserted for at least 240ms after VCC has
risen above the reset threshold. Reset thresholds suitable for
operation with a variety of supply voltages are available. The
APX809/810 have push pull outputs. The APX809 have an active
•
•
•
•
•
•
Push-Pull RESET Active High (APX810)
200ms Typ Power-On Reset Pulse Width
30µA Supply Current (Typ.)
Guaranteed Reset Valid to V = +1V
CC
No External Components
SOT23 and SOT23R: Available in “Green” Molding
Compound (No Br, Sb)
Lead Free Finish/RoHS Compliant (Note 1)
low RESET output, while the APX810 has an active high
RESET output. The reset comparator is designed to ignore fast
transients on VCC, and the outputs are guaranteed to be in the
correct logic state for VCC down to 1V. Low supply current makes
the APX809/810 ideal for use in portable equipment. The
APX809/810 is available in a 3-pin SOT23 and SOT23R
package.
•
Applications
•
•
•
•
•
•
Computers
Controllers
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable/Battery Powered Equipment
Automotive
Ordering Information
-
APX8 XX XX XX X X
Lead Free
G : Green
Enable
Voltage
Package
SA : SOT23
SR : SOT23R
Packing
-7 : Taping
46 : 4.63
44 : 4.38
40 : 4.00
31 : 3.08
29 : 2.93
26 : 2.63
23 : 2.25
09 : Active-Low
10 : Active-High
Package
Packaging
(Note 2)
SOT23
7” Tape and Reel
Device
Code
APX809-XXSA
APX810-XXSA
APX809-XXSR
APX810-XXSR
Quantity
Part Number Suffix
SA
SA
SR
SR
3000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
-7
-7
-7
-7
SOT23
SOT23R
SOT23R
Notes:
1. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
APX809/810 Rev. 3
1 of 9
MARCH 2008
www.diodes.com
© Diodes Incorporated