CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
NPCAPTM-PSCSeries
Super low ESR, high ripple current capability
Rated voltage range : 2.5 to 16Vdc
Nominal capacitance range : 270 to 2,700μF
・
・
・
・
・
PSE P2-42
Endurance : 15,000 hours at 105
℃
Longer life
Downsizing
Suitable for DC-DC converters, voltage regulators and decoupling applications
for computer motherboards
Added 2.5V 820μF (ESR 5m max.)
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
PSC
・
・
・
・
Ω
RoHS2 Compliant
Halogen Free
SPECIFICATIONS
◆
Items
Characteristics
Category
Temperature Range
-55 to +105
℃
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
2.5 to 16Vdc
20% (M)
Rated voltage 1.15
(at 20 , 120Hz)
±
℃
(at 105
)
℃
×
Leakage Current
I=0.2CV or 500μA, whichever is greater.
Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (Vdc
*Note
)
(at 20 after 2 minutes)
℃
Dissipation Factor
0.10 max.
(at 20 , 120Hz)
(tan
)
℃
δ
Low Temperature
Z(-25 )/Z(+20
)
)
1.15
1.25
℃
℃ ≦
Characteristics
Z(-55 )/Z(+20
℃
℃ ≦
(at 100kHz)
(Max.Impedance Ratio)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours
℃
at 105
.
℃
Appearance
Capacitance change
No significant damage
20% of the initial value
≦±
D.F. (tan
ESR
Leakage current
)
150% of the initial specified value
≦
150% of the initial specified value
≦
The initial specified value
≦
δ
Bias Humidity Test
Surge Voltage Test
Failure Rate
The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60
90 to 95% RH for 1,000 hours.
,
℃
℃
Appearance
Capacitance change
No significant damage
20% of the initial value
≦±
D.F. (tan
ESR
Leakage current
)
150% of the initial specified value
150% of the initial specified value
The initial specified value
δ
≦
≦
≦
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds
℃
through a protective resistor(R=1k ) and discharge for 5 minutes 30 seconds.
Ω
Appearance
Capacitance change
No significant damage
20% of the initial value
≦±
D.F. (tan
ESR
Leakage current
)
150% of the initial specified value
150% of the initial specified value
The initial specified value
δ
≦
≦
≦
0.5% per 1,000 hours maximum (Confidence level 60% at 105
)
℃
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃.
DIMENSIONS [mm]
Terminal Code : E
◆
●
MARKING
EX) 2.5V820µF
◆
Coated Case
3D6
C
Size code
H08
8.0
0.6
3.5
HB5
8.0
0.8(Note1)
3.5
JB5
10.0
0.8(Note1)
5.0
JC5
10.0
0.6
820
V
φD
φd
F
2.5
5.0
φD'
L'
φD+0.5max.
L+1.5max.
L+1.0max.
L'
15min.
4min.
Note1 : 0.6 for rated volt 16V.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001R
2-44