APA0710/0711
1.1W Mono Low-Voltage Audio Power Amplifier
Features
General Description
·
·
Operating Voltage : 2.6V-5.5V
TheAPA0710 is a bridged-tied load (BTL) or singled-
ended(SE)audiopower amplifierdevelopedespecially
for low-voltage applications where internal speakers
and external earphone operation are required. The
APA0711isaonlyBTLaudiopoweramplifier developed
especially for low-voltage applications where internal
speakers are required. Operating with a 5V supply,
theAPA0710/1 can deliver 1.1W of continuous power
into a BTL 8W load at 10% THD+N throughout voice
bandfrequencies.Although thisdeviceischaracterized
out to 20kHz,itsoperationisoptimizedfor narrowband
applications such as wireless communications. The
BTL configuration eliminates the need for external
coupling capacitorson the output inmost applications,
whichisparticularlyimportant forsmall battery-powered
equipment. A unique feature of theAPA0710 isthat it
allows the amplifier to switch from BTL to SE on the
fly when anearphonedrive isrequired. Thiseliminates
complicated mechanical switching or auxiliary devices
just to drive the external load. This device features a
shutdown mode for power-sensitive applications with
special depopcircuitrytoeliminatespeaker noisewhen
exiting shutdown mode. TheAPA0710/1 are available
in an 8-pin SOP and 8-pin MSOP-P with enhanced
thermal pad.
APA0710 Compatible with TPA711
APA0711 Compatible with TPA751
Bridge-TiedLoad (BTL) or Single-Ended (SE)
Modes Operation (for APA0710 only)
Supply Current
·
·
– IDD=1.3mA at VDD=5V ,BTL mode
– IDD=0.9mA at VDD=3.3V ,BTL mode
LowShutdown Current
·
·
– IDD=0.1mA
LowDistortion
– 630mW, at VDD=5V, BTL, RL=8W
THD+N=0.15%
– 280mW, at VDD=3.3V, BTL, RL=8W
THD+N=0.15%
·
Output Power
at 1% THD+N
– 900mW, at VDD=5V, BTL, RL=8W
– 400mW, at VDD=3.3V, BTL, RL=8W
at 10% THD+N
–1.1W at VDD=5V, BTL, RL=8W
–480mW at VDD=3.3V, BTL, RL=8W
Depop Circuitry Integrated
Thermal Shutdown Protection and
Over Current Protection Circuitry
High supplyvoltage ripple rejection
Surface-Mount Packaging
– 8 pin MSOP-P (with enhanced thermal pad)
power package available
·
·
Applications
·
·
·
·
Mobil Phones
·
·
PDAs
Digital Camera
Portable Electronic Devices
– SOP-8 package
·
Lead FreeAvailable (RoHSCompliant)
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright ã ANPEC Electronics Corp.
Rev. A.5 - Oct., 2005
1
www.anpec.com.tw