AP1605
PWM/PFM Dual-mode Step-Down Switching Regulator
Features
General Description
- Low current consumption:
In operation: 100µA max.
AP1605 consists of CMOS step-down switching
regulator with PWM/PFM dual mode control. These
devices include a reference voltage source, oscillation
circuit, error amplifier, internal PMOS and etc.
Power off: 2µA max.
- Input voltage: 2.5V to 7V.
Adjustable version (+2.5%)
- PWM/PFM dual Mode
AP1605 provides low-ripple power, high efficiency,
- Oscillation frequency: 300KHz (Typ.)
- With a power-off function.
- Built-in internal SW P-channel MOS
- SOP-8L/TSSOP-8L Package.
and
excellent
transient
characteristics.
The
PWM/PFM control circuit is able to very the duty ratio
linearly 0%~0.25% (PFM) and 25%~100% (PWM).
With the addition of an internal P-channel Power MOS,
a coil, capacitors, and a diode connected externally,
these ICs can function as step-down switching
regulators. They serve as ideal power supply units for
portable devices when coupled with the SOP–8L
mini-package, providing such outstanding features as
low current consumption. Since this converter can
accommodate an input voltage of up to 7V, it is also
ideal when operating via an AC adapter.
Applications
- On-board power supplies of battery devices for
portable telephones, electronic notebooks, PDA,
and other hand-held sets.
- Power supplies for audio equipment, including
portable CD players and headphone stereo
equipment.
- Fixed voltage power supply for cameras, video
equipment and communications equipment.
- Power supplies for microcomputers.
- Conversion from four Ni-H or Ni-Cd cells or two
lithium-ion cells to 3.3V/3V.
- Conversion of AC adapter input to 5V/3V.
Pin Assignments
Pin Descriptions
Pin
Name
FB
Pin No.
Description
SOP TSSOP
Vss
Vss
SW
1
2
3
4
8
7
6
5
FB
CE
1
4
Feedback pin
Chip Enable:
2、3
CE
2
H: Enable
AP1605
L: Disable
Vcc
IC signal power supply pin,
add a 10Ω resistor to PVcc
and a 0.1µF capacitor to
GND.
PVcc
SW
Vcc
PVcc
SW
3
5
6、7
8
SOP-8L
4
IC power supply pin
Switch Pin. Connect external
inductor/diode here.
Minimize trace area at this
pin to reduce EMI.
GND Pin
1
8
Vss
SW
5、6
7、8
2
3
4
7
6
5
PVcc
PVcc
Vcc
CE
CE
FB
AP1605
Vss
1
TSSOP-8L
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. 1.1 Jan 18, 2005
1/6