Datasheet > AN400

AN400

更新时间： 2022-12-17 01:41:50

品牌	Logo	应用领域
EXTECH		测试
页数	文件大小	规格书
6页	146K
描述
Cup Thermo-Anemometer

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

AN400 数据手册

Record and Recall MIN / MAX Function

1. To begin capturing the Minimum (MIN) and Maximum (MAX) air velocity and

temperature readings, momentarily press the REC key. The “REC” icon will be

displayed.

2. Now, use the REC button to toggle the view from MIN to MAX and from MAX to MIN

readings. The ‘RECMAX’ or ‘REC MIN’ will appear along with the recalled reading for

convenience.

3. To delete the maximum or minimum value and record a new value, momentarily press

the HOLD button while in either “RECMAX’ or “REC MIN” mode.

4. To return to normal operation, press and hold the REC button until the “REC”, ‘MAX’,

and ‘MIN’ icons switch off.

Datalogging

Datalogging allows the user to store and recall up to 100 readings with the press of a button.

1. Momentarily press the REC button to display the “REC” icon in the display.

2. Press the Logger button to manually store a single reading into memory.

The location number of the reading will appear in the main display

(memory locations remaining will appear in the lower display) for 2

seconds and then the normal display will return.

3. To exit the datalogger, press and hold the REC button for >2 seconds. The

“REC” icon will disappear.

4. To recall the stored data, momentarily press the HOLD button to display the “HOLD”

icon.

5. Momentarily press the REC button to display the total number of data

points stored in memory. “ttL” will also appear in the lower display.

6. Use the ▲ and ▼ buttons to scroll through the memory locations to view

the logged readings. The “units” display will flash while in the recall mode.

7. The memory location will first appear in the display followed by the reading.

8. To exit the recall data function, press the momentarily HOLD button.

Note: The selected “unit of measure” icon will flash continuously when the meter is in recall

mode.

Clearing Stored Data

1. Press and hold the REC button while turning the meter on to clear memory.

2. The LCD will indicate “n” in the main display and “CLr” in the lower display.

3. Momentarily press the ▼ button to display “Y” and “CLr”.

4. Press the HOLD/Unit button. When the LCD indicates “nuLL” and “CLr”, the memory

has been cleared.

AN400 V3.0 12/06

1 2 345 6

下载PDF

与AN400相关器件

型号	品牌	描述	获取价格	数据表
AN4000-521P	ETC	AN0625-521P	获取价格
AN4001	TE	Application Note 300 Watt Class E Amplifier Using MRF151A	获取价格
AN4002	TE	Recommendations For Long -Term Transistor Storage	获取价格
AN4003	TE	Closed Loop Control Maximizes MAPM-030400-010C00 and MAPM-030400-060C00 Module Performance	获取价格
AN4003	FAIRCHILD	PC POWER SUPPLY DESIGN WITH KA3511	获取价格
AN-4003	FAIRCHILD	PC POWER SUPPLY DESIGN WITH KA3511	获取价格