5秒后页面跳转
AN217 PDF预览

AN217

更新时间: 2022-04-23 23:00:11
品牌 Logo 应用领域
芯科 - SILICON /
页数 文件大小 规格书
18页 325K
描述
C8051F35X DELTA-SIGMA ADC USER’S GUIDE

AN217 数据手册

 浏览型号AN217的Datasheet PDF文件第3页浏览型号AN217的Datasheet PDF文件第4页浏览型号AN217的Datasheet PDF文件第5页浏览型号AN217的Datasheet PDF文件第7页浏览型号AN217的Datasheet PDF文件第8页浏览型号AN217的Datasheet PDF文件第9页 
AN217  
Once the modulator clock is configured, the modulator sample rate of the ADC is also set to MDCLK/128.  
Therefore, the typical sample rate is 2.4576 MHz/128 = 19.2 kHz. This will be well above the signal bandwidth  
measured, as the maximum output word rate for the ADC is 1 kHz.  
SFR Definition 2.2. ADC0CLK: ADC0 Modulator Clock Divisor  
R/W  
Bit7  
R/W  
Bit6  
R/W  
Bit5  
R/W  
R/W  
Bit3  
R/W  
Bit2  
R/W  
Bit1  
R/W  
Reset Value  
ADC0CLK  
Bit4  
00000000  
Bit0  
SFR Address:  
0xF7  
Bits 7–0: ADC0CLK: ADC0 Modulator Clock Divisor.  
This register establishes the Modulator Clock (MDCLK), by dividing down the system clock  
(SYSCLK). The input signal is sampled by the modulator at a frequency of MDCLK / 128. For opti-  
mal performance, the divider should be chosen such that the modulator clock is equal to  
2.4576 MHz (modulator sampling rate = 19.2 kHz).  
The system clock is divided according to the equation:  
MDCLK = SYSCLK / (ADC0CLK + 1)  
Note: The Modulator Sampling Rate is not the ADC Output Word Rate.  
6
Rev. 0.2  

与AN217相关器件

型号 品牌 描述 获取价格 数据表
AN217P ETC 用于立体声收音机和收录机的AM调谐器及FM/AM高放、福频、本振、中放电路.

获取价格

AN219 MICROCHIP Comparing Digital Potentiometers to Mechanical Potentiometers

获取价格

AN-2195 TI AN-2195 Driving High Speed ADCs with the LMH6521 DVGA for High IF AC-Coupled Applications

获取价格

AN-22 ETC Designing Multiple Output Power Supplies with TOPSwitch

获取价格

AN220 SILICON USB DRIVER CUSTOMIZATION

获取价格

AN2200 SEOUL Acriche series

获取价格