AM26LV32
LOW-VOLTAGE HIGH-SPEED
QUADRUPLE DIFFERENTIAL LINE RECEIVER
SLLS202D – MAY 1995 – REVISED APRIL 2000
†
D OR NS PACKAGE
Switching Rates up to 32 MHz
(TOP VIEW)
Operates from a Single 3.3-V Supply
Ultra-Low Power Dissipation . . . 27 mW Typ
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1B
1A
1Y
G
2Y
2A
2B
GND
V
CC
Open-Circuit, Short-Circuit, and Terminated
Fail-Safe
4B
4A
4Y
G
3Y
3A
3B
–0.3-V to 5.5-V Common-Mode Range With
±200 mV Sensitivity
Accepts 5-V Logic Inputs With a 3.3-V V
Input Hysteresis . . . 50 mV Typ
CC
235 mW With Four Receivers at 32 MHz
†
TheNSpackageisonlyavailable
left-ended taped and reeled.
Pin-to-Pin Compatible With AM26C32,
AM26LS32, and MB570
description
The AM26LV32, BiCMOS, quadruple, differential line receiver with 3-state outputs is designed to be similar to
TIA/EIA-422-B and ITU Recommendation V.11 receivers with reduced common-mode voltage range due to
reduced supply voltage.
The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The enable function
is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit
connection directly to a bus-organized system. Each device features receiver high input impedance and input
hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage
rangefrom–0.3Vto5.5V. Whentheinputsareopencircuited, theoutputsareinthehighlogicstate. Thisdevice
is designed using the Texas Instruments (TI ) proprietary LinIMPACT-C60 technology, facilitating ultra-low
power consumption without sacrificing speed.
This device offers optimum performance when used with the AM26LV31 quadruple line drivers.
The AM26LV32C is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
(each receiver)
ENABLES
DIFFERENTIAL
INPUT
OUTPUT
G
G
H
X
X
L
H
H
V
ID
≥ 0.2 V
H
X
X
L
?
?
–0.2 V < V < 0.2 V
ID
H
X
X
L
L
L
V
ID
≤ –0.2 V
Open, shorted, or
H
X
X
L
H
H
‡
terminated
X
L
H
Z
H = high level, L = low level, X = irrelevant,
Z = high impedance (off), ? = indeterminate
‡
See application information attached.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinIMPACT-C60 and TI are trademarks of Texas Instruments.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265