VER : B_6
update : 2012.05.11
LED Power
ALF150 SERIES
150 Watts
KEY FEATURES
IP65/67 Design for Indoor or LED Outdoor Installations
Universal Input: 90-305 VAC or 120-430 VDC
Three in one dimming function
(1~10VDC & PWM Signal or resistance)
Bulit-in Active PFC Function
Free Air Convection
High Reliability
With Constant Current & Constant Voltage
Output Voltage and Constant Current Level can Be
Adjusted Through Internal Potential Meter
LED Power Application
3-Years Product Warranty
ELECTRICAL SPECIFICATIONS
Model No.
ALF150-12S
150W
ALF150-24S
ALF150-36S
ALF150-48S
ALF150-54S
Max Output Wattage (W)
Voltage
90-305 VAC or 120-430 VDC
47-63 Hz
Frequency (Hz)
Current (Full load)
Input
2 A max. (115 VAC) / 1 A max. (230 VAC) / 0.9 A max. (277 VAC)
40 A max. (115 VAC) / 60 A max. (230 VAC)
Inrush Current (<2ms)
Leakage Current
<0.75 mA max.
Power Factor
PF>0.97 (115 VAC) / PF>0.95 (230 VAC) / PF>0.9 (277 VAC) at Full Load
Voltage (V.DC.)
12V
24V
36V
48V
54V
6 ~ 12V
±2%
Constant Current Range (V.DC.)
Voltage Accuracy
12 ~ 24V
18 ~ 36V
24 ~ 48V
27 ~ 54V
Current (Convection) (mA) max
Current ADJ Range (mA)
12500
6250
4166
3125
2777
6250 ~ 12500
3125 ~ 6250
2083 ~ 4166
1560 ~ 3125
1388 ~ 2777
Voltage ADJ Range (V.DC.)
(for IP65 Design)
10.8 ~ 13.2V
21.6 ~ 26.4V
32.4 ~ 38.5V
43.2 ~ 50.4V
48.6 ~ 55.5V
Line Regulation
±1%
Output
Load Regulation
±1%
Minimum Load
1%
Maximum Capacitive Load
Ripple & Noise (max.)
Efficiency (typ.)
100,000 uF
100mVp-p
90.5%
50,000 uF
100mVp-p
92.5%
33,000 uF
100mVp-p
93.5%
6,000 uF
200mVp-p
92.5%
6,000 uF
200mVp-p
92.5%
Hold-up Time
25 ms min.
100 kHz
Auto recovery
Auto recovery
Auto recovery
Auto recovery
3750V
Switching Frequency
Over Power Protection
Over Voltage Protection
Overt Temperature Protection
Short Circuit Protection
Input-Output (V.AC)
Protection
Isolation
Input-FG
(V.AC)
1880V
Output-FG .(V.AC)
Operating Temperature
Storage Temperature
Temperature Coefficient
Humidity
500V
-30°C…+70°C (with derating)
-40°C…+85°C
±0.02%/°C ( 0~50°C )
95% RH
Environment
MTBF
>75,000 h @ 25°C (MIL-HDBK-217F)
Vibration
10~500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes.
1. All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-1-